Renkforce 2266965 - Stereo Bluetooth Speaker Manual

Operating elements

1. Hang up / refuse call
2. LED status indicator
3. Answer call
4. Clip mount (removable)
5. Microphone
6. Volume control
7. Play / pause
8. hands-free / voice dialing
9. ON/OFF switch
10. USB charging port

Charging

Connect one end of the USB cable to the USB charging port on the device and the other end to a suitable (5 V/DC, 500 mA) power supply.

Pairing

1. Turn the speaker on.
   • The status LED will alternate red and blue to indicate pairing mode is on.
   • If pairing mode is not on, press and hold (3 sec) to enter pairing mode. A voice prompt will indicate "waiting for pairing".
2. Enable Bluetooth on your device and select "RFBTS-200". If prompted enter password "0000".
3. If pairing is successful:
   • Blue LED blinks 1x every 6 sec.
   • Voice prompts "Bluetooth connected".
4. Repeat steps 1 and 2 to pair additional Bluetooth devices.

Tips

• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired devices will replace the oldest paired device.

Operation

Button	Description
	Press to end call Press and hold to reject call
	Answer call Press and hold to enter pairing mode Double-press redial last number
	Volume up + / down - Press and hold + (next song) / - (previous song)
	Play / pause music
	Press for hands-free calling Double-press to activate voice command

Care and cleaning

• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Renkforce 2266965 - Stereo Bluetooth Speaker Manual