uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Automatic transmission models with electronic gear selector
Message
Appears when you try to change the gear position
●
without depressing the brake pedal.
Appears when you try to change the gear position
●
without releasing your foot off the accelerator pedal.
Appears when the
●
vehicle is moving.
Appears if you change the gear position to
●
vehicle is moving forward, or to
reversing.
Appears when you set the power mode to ON without
●
fastening the driver's seat belt.
Appears when you change the gear position after
●
has been automatically selected with the driver's door
open, the driver's seat belt unfastened, then the brake
pedal is released.
Appears when you press the
●
engaged due to low ATF temperature.
106
Condition
P button is pressed while the
(
(
R while the
D while the vehicle is
(
P button but it is not
(
Explanation
Depress the brake pedal, then select a shift button.
●
Release your foot off the accelerator pedal, then select a
●
shift button.
Make sure that the vehicle comes to a stop before
●
operating the select button.
Fasten the seat belt properly before you start to drive.
●
2 Shift Operation P. 475
(
P
Depress the brake pedal until this message disappear.
●