Subscribe to Our Youtube Channel
Summary of Contents for Forney HA-0619
- Page 1 INSTRUCTION MANUAL MANUAL VALVE CONTROL MATERIAL TESTING MACHINE MN-FL.21.1 Forney Instruction Manual | MN-FL.21.1 Manual Valve Control...
- Page 2 CONTENTS Safety Warnings ........................3 Sequence of Operation ......................4 Functions of the Control Valve ....................5 Forney Instruction Manual | MN-FL.21.1 Manual Valve Control...
- Page 3 OF THE FOLLOWING MOVING PARTS CAN CRUSH AND CUT – Keep hands clear of moving parts while operating machinery! WEAR SAFETY GLASSES WHILE OPERATING EQUIPMENT – Always wear safety glasses while operating machinery! Forney Instruction Manual | MN-FL.21.1 Manual Valve Control...
- Page 4 SEQUENCE OF OPERATIONS Machines Equipped with Manual Control Value NOTE: Only qualified personnel should operate FORNEY machinery taking pre-cautions that moving parts that can crush and cut! 1. Select and install any breaking heads and spacers as needed for test type. Typical maximum piston travel is 2.5”, do not exceed maximum travel!
- Page 5 With valve Control Handle No. 1 in the metered advance position, this knob allows the operator to control the loading rate. Turn the control knob clockwise for a decrease and counterclockwise for an increase in the rate of load. Forney Instruction Manual | MN-FL.21.1 Manual Valve Control...
- Page 6 Note: During operation, the flow control valve will go through a significant temperature rise. Do not be alarmed, as this rise will not affect the operation of the testing machine. Forney Instruction Manual | MN-FL.21.1 Manual Valve Control...
Need help?
Do you have a question about the HA-0619 and is the answer not in the manual?
Questions and answers