Table of Contents
Advertisement
SSM (Sound Status Memory)
You can select your preferred sound setting; Flat,
Music, Movie, Sport and User.
Repeatedly press the MENU button to return to
normal TV viewing.
The sound
Flat
,
Music
,
Movie
programmed for good sound reproduction at the
factory and cannot be changed.
Turbo sound selection
When this function is on, the sound will be more
emphasized and amplified than normal sound.
Sound adjustment
You can adjust balance,Treble, Bass, AVL (Auto
Volume Leveler), AVL automatically keeps on an
equal volume level even if you change pro-
grammes. The Turbo sound creates an all around
sound as in a concert hall.
X-WAVE (Wireless Sound) (option)
You can also listen to the sound through the FM
receiver.
Note:
a. If the reception is poor or weak, select a dif-
ferent frequency.
b. For best results, there should be no more that
5m (16.4ft) between the TV and FM Receiver.
c. In certain areas, the FM transmitter ability
may be weak, such as near a broadcast
tower.
d. The reception sensitivity may depend on the
kinds of receiver (FM radio).
Sound output selection
In AV mode, you can select output sound for the
left and right loudspeakers.
Repeatedly press the I/II/
sound output.
L+R
:Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R
input is sent to right loud-speaker.
L+L
: Audio signal from audio L input is sent to left
and right loud-speakers.
R+R
:Audio signal from audio R input is sent to left
and right loud-speakers.
8
Sound adjustment
Stereo/Dual reception
When a programme is selected, the sound infor-
mation for the station appears after the pro-
gramme number and station name disappear.
and
Sports
are
Mono sound selection
In stereo reception if the stereo signal is weak,
you can switch to mono by pressing the I/II/
ton twice. In mono reception the depth of sound is
improved. To switch back to stereo, press the
I/II/
Language selection for dual language broad-
cast
If a programme is received in two languages (dual
language), you can switch to
DUAL I+II
ly.
DUAL I
the loudspeakers.
DUAL II
guage to the loudspeakers.
DUAL I+II
loudspeaker.
NICAM reception (option)
If your set is equipped with the receiver for
NICAM reception, the high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digi-
tal sound can be received.
Sound output can be selected according to the
type of received broadcast by pressing the I/II/
button repeatedly.
1. When NICAM mono is received, you can
2. When NICAM stereo is received, you can
button to select the
*
3. When NICAM dual is received, you can select
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I
button twice again.
*
DUAL I
by pressing the I/II/
sends the primary broadcast language to
sends the secondary broadcast lan-
sends a separate language to each
select
NICAM MONO
or FM MONO.
select
NICAM STEREO
or FM MONO. If the
stereo signal is weak, switch to FM mono.
NICAM DUAL I
,
NICAM DUAL II
NICAM DUAL I+II
or
MONO
mono is selected the display
on the screen.
but-
*
,
DUAL II
or
button repeated-
*
*
or
. When FM
MONO
appears
Advertisement
Table of Contents
