Table of Contents SYMBOLS WARNING / INFORMATION ..................3 PURPOSE OF THE DEVICE ......................... 4 SAFETY RULES ........................4 Before working ......................4 Proper use ........................4 Electrical safety ....................... 5 DESCRIPTION OF THE DEVICE ..........
SYMBOLS OS TRZEGAWCZE / INFORMATION SYMBOLS OS TRZEGAWCZE / INFORMATION ATTENTION: Before using the device please read the instruction manual and safety ATTENTION: Before using the device please read the instruction manual and safety instructions. Keep these instructions. ATTENTION: Do not expose to rain or other precipitation. ATTENTION: Do not expose to rain or other precipitation.
PURPOSE OF THE DEVICE Depending on the intended use of the device can be used as an aerator or scarifier. Scarifier using a roller pulled by a substrate moss and weeds together with roots and the substrate is loosened. As a result, the lawn can better take nutrients and be cleaned.
Attention! After switching off the cutting blades can move even for a moment. Attention! After switching off the cutting blades can move even for a moment. electrical Safety 1. Never operate the device Pass the power cord. 1. Never operate the device Pass the power cord. 2.
ASSEMBLY • Insert the lower part of the frame in the holes in the housing (Fig. 1) • Put the cable guide on the upper part of the frame. • Connect the upper part to the lower frame by means of bolts and nuts (Fig. 2). •...
TECHNICAL DATA Power 230V / 50Hz 2500W Power sales 2500rpm Working width 320mm - 4 to 10 mm The scope of work of the aerator depth The scope of work scarifier depth - 10 to 4 mm Rear Bag Capacity Net weight 10,5kg The sound pressure level L...
scarification 1. Adjust the working height depending on the state of the grass and the lawn. 1. Adjust the working height depending on the state of the grass and the lawn. 2. Tilt the aerator so that the front wheels are in the air. 2.
Changing the operating shaft 1. Wear protective gloves. 1. Wear protective gloves. 2. Wrap the two hex bolts ( 3) and remove the roller. 2. Wrap the two hex bolts ( 3) and remove the roller. 2. Wrap the two hex bolts ( 3) and remove the roller. 2.
Thanks re-use, material utilization or other forms of old appliances, you make an important contribution to protecting our environment. COMPANY DETAILS PH Powermat TMK Bijak Sp. General Partnership Ul. Defenders of the Gdansk Post 97 42-400 Zawiercie DECLARATION OF CONFORMITY...
Need help?
Do you have a question about the PM-AEW-2500 and is the answer not in the manual?
Questions and answers