Do you have a question about the 16936 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Muirhead 16936
Page 1
PRODUCT MANUAL COMPACT FIRE SYSTEM STATUS PANEL Part No. 16936...
Page 2
LEGAL NOTICE You acknowledge that this document is protected under copyright law and Remote Control Technologies Pty Ltd or its related bodies corporate (‘RCT’) owns the copyright in this document or otherwise have permission or licence from the relevant owner to use certain specific works.
Contents General Safety Warnings Personal Safety Machine Product Product Overview Features and Functions Operation and Use Installation Guide Wiring Connections Diagrams External Wiring Diagram (750e) Calibration Calibration (CAL) Mode No Extension Mode Service Information Service Schedule Service Procedure Parts List Technical Specifications Compliance and Standards Troubleshooting...
Product Overview ® The Muirhead Light Vehicle Fire System Status Panel, part number 16936, is a unique product that incorporates the following features: ® Figure 1 Muirhead Light Vehicle Fire System Status panel, part number 16936 Function Description Cylinder Pressure...
Operation and Use The control unit does not operate while the ignition is not active. After ignition is applied, the unit pulses the alert indicators and alarm twice to show that they are operating. The control unit state is displayed by the alert indicators as follows: ■...
Installation Guide Install the control unit in a suitable location near the operator. Refer to the wiring table below and the wiring diagram/s in this manual to connect the control unit. It is recommended that the wiring is installed alongside the OEM wiring ensuring that it is secured at regular intervals;...
No Extension Mode The 16936 can also be configured for no extension on shutdown. The process for setting this function is below. Press and hold the control unit panel test push button once in calibration mode for more than 10 seconds and then release it.
Turning the ignition on and off WILL NOT RESET the system. Parts List Part No. Description 16936 Fire system status panel 0475 Tank pressure switch low warning 1200 kPa (not supplied with unit) 2348...
Technical Specifications Dimensions, control unit only: Length: 120 mm | Width: 80 mm | Height/Depth: 55 mm Dimensions, boxed for freight: Length: 235 mm | Width: 130 mm | Height/Depth: 127 mm Weight, control unit only: 0.5 kg Weight, including loom/packaging for 0.7 kg freight: Input nominal voltage:...
Need help?
Do you have a question about the 16936 and is the answer not in the manual?
Questions and answers