Subscribe to Our Youtube Channel
Summary of Contents for Powermat PM-GP-90
- Page 1 USER MANUAL 2-in-1 PNEUMATIC STAPLER PM-GP-90 PNEUMATIC NAILER PM-GP-90 PRO ORIGINAL MANUAL...
-
Page 2: Table Of Contents
Table of Contents WARNING / INFORMATION SYMBOLS ................. 3 TOOL CHARACTERISTICS ....................... 4 EQUIPMENT............................4 TECHNICAL DATA ..........................4 GENERAL SAFETY CONDITIONS ....................4 CONDITIONS OF USE ........................6 USING THE TOOL ........................7 MAINTENANCE.......... -
Page 3: Warning / Information Symbols
The manual contains basic information related to the product, however, due to continuous improvement of our devices, the data in the manual may differ from the actual. Please pay attention to any differences that may occur. WARNING / INFORMATION SYMBOLS Before using the device, carefully read the instruction manual and safety ATTENTION: recommendations. -
Page 4: Tool Characteristics
EQUIPMENT The tool is equipped with a coupling that allows it to be connected to the pneumatic system. TECHNICAL DATA Model PM-GP-90 PM-GP-90 PRO 1.48 kg 3.4 kg Weight Air connection diameter 1/4 " 1/4 "... - Page 5 damage to the tool and sustaining injuries. Do not overload the air supply line to the tool. Do not use the hose to carry, connect or disconnect the coupler from the compressed air supply. Avoid contact of the power cord with heat, oil, sharp edges and moving parts.
-
Page 6: Conditions Of Use
REPAIRS The tool should be repaired only at authorized workshops, using only original spare parts. This will ensure proper operational safety of the air tool. Do not clean your air tool with gasoline, solvents, or any other flammable liquid. The fumes can catch fire, causing the tool to explode and serious injury. -
Page 7: Using The Tool
Do not use different types of nails in one magazine insert. MODEL PM-GP-90 PRO Pull back on the magazine pusher until it locks. Slide the nail pack through the slot in the magazine. Release the pusher latch so that the pusher pushes the nails towards the exit of the tool. - Page 8 The maximum pressure for the device must not be exceeded. For a given job, it is recommended to use the lowest possible pressure to save energy, reduce noise, reduce tool wear and increase work safety. CHOICE OF NAILS AND STAPLES I. MODEL PM-GP-90 PRO D-shaped nail head (angle 34 about)
- Page 9 II. MODEL PM-GP-90...
-
Page 10: Maintenance
MAINTENANCE Never use gasoline, thinner or any other flammable liquid to clean the tool. Fumes can catch fire, causing the tool to explode and seriously injure you. Solvents used to clean the toolholder and body can soften the seals. Thoroughly dry the tool before starting work. -
Page 11: Disposal Of Used Devices
By reusing, reusing materials or other forms of using used devices, you make a significant contribution to the protection of our environment. Manufacturer: PH Powermat TMK Bijak Sp. Jawna Ul. Obrońców Poczty Gdańskiej 97 42-400 Zawiercie...
Need help?
Do you have a question about the PM-GP-90 and is the answer not in the manual?
Questions and answers