Summary of Contents for iFire CRM 43
- Page 1 Safe Use Instructions & Maintenance Installation Instructions BIO BURNERS CRM 43 / 58 / 75 / 93 / 113 / 130...
-
Page 3: Warranty
Warranty Warranty of the device’s good function provided, duration two (2) years from the purchase date, which includes any repair service and spare parts cost for malfunction that will come up because of building mistake or not appropriate material used. The warranty does ’t cover any breakdown that will possibly appear because of wrong use of the device, vandalism, hyper- voltage of the electric power, force majeure (e.g. - Page 4 asic safety usage instructions: ▪ Never leave a burner in operation unsupervised. ▪ Keep children and pets away from the burner whether it is on operation or not. ▪ The burner is not a toy. ▪ The burner must always be placed on flat incombustible horizontal surface. (NOT straight to plasterboard, wood or similar material surfaces) ▪...
- Page 5 ΑUTONOM WEIGHT ROOM DIMEN- BIO BURN TYPE (WxLxH) (cm) (mL) Y (h) (Kg) SIONS (m BIO BURN CRM 43 1.950 3.5 – 5.0 12.5 43 Χ 19 Χ 8 BIO BURN CRM 58 2.600 11.0 3.5 – 5.0 58 Χ 19 Χ 8 BIO BURN CRM 75 3.400...
-
Page 6: Maintenance Instructions
▪ Use only the provided tool to move the shutter since it is very warm and there is danger of burning in case of barehanded contact. ▪ If the flame does not turn off completely when having moved the shutter to its closed position, move it back again to its open one and try again to turn it off drawing the shutter with a faster and more abrupt move this time. - Page 7 Problem Possible Cause Action A. Not enough fuel in the burner. B. You haven’t used the proper fuel (it’s ▪ Τhe level of the fuel, must be high. obligatory to use ONLY fuels with ethanol as main substance). ▪ Check the type of the used fuels. C.
- Page 8 Problem Possible Cause Action ▪ Find and remove the source of the air (probably the window/door is open or the blower in function blows the air to the flame). It is possible to have been ▪ If you can not remove the source of the air and the The flame is provoked by a strong air cur- flame is too vivid, turn off the burner.
-
Page 9: Installation
INSTALLATION... - Page 10 Photo.1 On the surface of the burner there is a special filling (Photo 1). Check that the cover opens and closes properly. Photo.2 ATTENTION! At its initial position always close the cover of the burner and open the special filling hole (Photo 2). To place the Burner in the special hole into the built-in fireplace construction, use the Photo.3...
- Page 11 Photo.6 To light up the burner we use a lighter with a long spout. Place the ledge of the lighter in the hole of the burner so as to touch the ceramic stone and then light (Photo 6). Photo.7 To quench the burner, use the special tool that is provided with the burner.
Need help?
Do you have a question about the CRM 43 and is the answer not in the manual?
Questions and answers