Advertisement
BMP-YLK1
Installation Guide
Product Note:
The YoLink® Hub is currently available in two sizes. This mount is specifically designed for
the YoLink® Hub measuring 4.33" x 4.33" square. It will not work with the smaller YoLink® Hub which
measures 3.38" x 3.38" square. Please check the size of your YoLink® Hub before ordering to insure
proper fit.
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com
Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See www.altelix.com for most current information
IS0207 Rev B 08/04/23
YoLink® is a trademark or registered trademark of YoSmart, Inc.
Advertisement
Table of Contents
Summary of Contents for Altelix BMP-YLK1
- Page 1 Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC. Specifications are subject to change without notice. See www.altelix.com for most current information IS0207 Rev B 08/04/23 YoLink®...
- Page 2 BMP-YLK1 Installation Guide The BMP-YLK1 can be directly mounted to the inside of a network equipment cabinet using the included double-sided tape. For wall mounting, wall anchors and screws are also provided. Double Sided Tape To use the included double-sided tape, firmly attach to the rear of the BMP-YLK1 as shown.
Need help?
Do you have a question about the BMP-YLK1 and is the answer not in the manual?
Questions and answers