Installation On Suspended Flooring; Stacking Kit - Zanussi ZWF842C3PW User Manual

INSTALLATION ON SUSPENDED FLOORING

Suspended wooden floors are particularly
susceptible to vibration.
To limit vibration we recommend placing a
waterproof wooden panel, at least 15 mm thick,
under the appliance. It should be screwed to at
least 2 floor beams and should extend beyond the
front feet.
If possible, install the appliance where the floor is
more stable.
ELECTRICAL CONNECTION
At the end of installation you can connect the mains
plug to the mains socket.
The rating plate on the inner edge of the appliance
door and the 'Technical Data' chapter indicate the
ACCESSORIES
AVAILABLE IN WWW.ZANUSSI.COM/SHOP
OR FROM AUTHORISED DEALER
Read carefully the instructions supplied with the
accessory.
Only appropriate accessories
approved by ZANUSSI ensure the
safety standards of the appliance. If
unapproved parts are used, any claims
will be invalidated.
FIXING PLATE KIT
If you install the appliance on a plinth that is not an
accessory supplied by ZANUSSI, secure the
appliance in the fixing plates.
Read carefully the instructions supplied with the
accessory.

STACKING KIT

The tumble dryer can be stacked on the top of the
washing machine only by using the correct
stacking kit.
necessary electrical ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical installation can
take the maximum load required, also taking into
account any other appliances in use.
Connect the appliance to an earthed socket.
The power supply cable must be easily accessible
after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service Centre.
The manufacturer does not accept any
responsibility for damage or injury through failure to
comply with the above safety precaution.
WARNING! Do not put the tumble
dryer under the washing machine.
Verify the compatible stacking kit by
checking the depth of your appliances.
9