Advertisement
3.
speciFicAtion
i
model no: ...................................................................cP36s
Battery ........................................................3.6V 1.3Ah li-ion
no load speed ....................................................0 - 210 rpm
maximum torque..........................................................3.5nm
charging time.................................................................3-5hr
Vibration ................................................................... 0.48m/s
uncertainty ................................................................. 1.5m/s
noise Pressure ......................................................... 61dB(A)
noise Power.............................................................. 72dB(A)
4. operAtion
fig.1
4.1.
to charge the screwdriver, insert the charger jack into the charging socket near the base of the screwdriver handle and plug the charger
into a mains socket.
4.2.
the indicator light (fig.2) will illuminate to indicate the battery is being charged. When charging is complete (all lights glowing),
unplug the charger from the mains and the screwdriver.
4.3.
Place a bit into the bit holder of the screwdriver. select the required direction by using the reverse switch (which will lock the screwdriver
in its central position) and squeeze the trigger to start the screwdriver. the led spotlight will light with initial pressure on the trigger.
4.4.
the led worklight in the handle can be switched on or off by using the on/off switch in the handle (fig.1).
4.5.
to change the position of the handle, press the handle lock and turn the handle around 180° until it clicks into position (fig.2)
4.6.
to select torque or drill setting, twist the torque selector around to the required setting - from 1 (the lowest) to 8 (the highest) for torque setting
or to the drill symbol for drilling.
4.7.
When finished working, remove the bit from the bit holder, pulling back the quick release bit holder if needed (fig.1). clean the screwdriver
and replace all parts in the storage case. store the case in a safe, dry, child proof location.
5. wArrAntY inFormAtion
5.1.
the battery fitted to this cordless tool is considered to be a consumable item and its ability to accept charge will reduce over time. our
warranty will cover genuine battery malfunction, but not fair wear and tear, for a period of 12 months.
© Jack sealey limited
2
2
fig.2
Original Language Version
cP36s.V3
issue 2 (3) 31/01/18
Advertisement
