Table of Contents
Advertisement
Fault
Water is leaking from
the appliance.
The laundry is too
damp.
Cause and troubleshooting
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
The lever for the heat exchanger cover is not closed
correctly.
Ensure that the lever for the heat exchanger cover
▶
is closed correctly.
→ "Closing the base unit", Page 36
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 23
There has been a power cut.
Check whether the lighting in your room or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 23.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Drying target not adjusted.
→ "Adjusting the dryness level", Page 22.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 23
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 36.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 32.
2.
→ "Starting the programme", Page 27.
3.
Troubleshooting en
41
Advertisement
Table of Contents
