1. Manuals
  2. Brands
  3. Idis Manuals
  4. DVR
  5. TR-2416
  6. Operation manual

Idis TR-2416 Operation Manual

Hide thumbs Also See for TR-2416:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital
Video
Recorder
Operation Manual
TR-2416

Advertisement

Table of Contents
loading

Related Manuals for Idis TR-2416

Summary of Contents for Idis TR-2416

  • Page 1 Digital Video Recorder Operation Manual TR-2416...
  • Page 2 Before reading this manual This operation manual contains basic instructions on installing and using Digital Video Recorder, an IDIS product. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and heed to the warnings and precautions contained herein while using the product.
  • Page 3 Before reading this manual Important Safeguards 1. Read Instructions 14. Damage requiring Service All the safety and operating instructions should be read before the appliance Unplug this equipment from the wall outlet and refer servicing to qualified is operated. service personnel under the following conditions: 2.
  • Page 4 Before reading this manual In-Text Symbol Type Description Caution Important information concerning a specific function. Note Useful information concerning a specific function. User’s Caution Statement Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
  • Page 5 © 2020 IDIS Co., Ltd. IDIS Co., Ltd. reserves all rights concerning this operation manual. Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this operation manual are subject to change without prior notice.

  • Page 6: Table Of Contents

    Table of Contents Part 1 - Getting Started ........9 Login .
  • Page 7 IDIS Web ........
  • Page 8 Part 4 - IDIS Web ........

  • Page 9: Part 1 - Getting Started

    Part 1 - Getting Started Login Enter the verification code you receive by e-mail and click OK. Configuring the DVR’s settings and accessing its searching and other functions require an authorized user login. Bring up the Live menu and either press the SETUP button on the remote control or click on (Login) using the mouse.

  • Page 10: Live Mode

    Part 1 - Getting Started Live Mode • Login/Logout Log into and out from accounts. If in the logged in state, the account ID is shown. If in the logged out state, the login icon is shown. • Display Live Menu Used to change the screen layout to single screen, 2x2, 1x5, 1x7, 3x3, 4x4.

  • Page 11: Video Display Area

    Part 1 - Getting Started • Search Cameo Sequence – All Channels: Exits the live monitoring mode and In Cameo Sequence mode, only the bottom right enters the search mode. screen in a split screen-setup changes sequence. In • Setup order to use the Cameo Sequence feature, Cameo Sequence (Display Setup - Main Monitor >...
  • Page 12 Part 1 - Getting Started Camera Screen Camera Menu Right-click on the video display area to bring up the camera menu. 1 Camera Title: Indicates the camera’s title. • PTZ: Allows you to control the selected camera as long 2 Status Indication: Displays system status icons. as it has Pan, Tilt and Zoom capabilities.

  • Page 13: Edit Group

    Part 1 - Getting Started Edit Group Zoom Press the ZOOM button on the remote control and select Edit Group lets you customize split screen pages in both Live and Search modes. a channel you wish to zoom in on. A zoom frame will appear on the selected channel.

  • Page 14: Ptz Control

    Part 1 - Getting Started PTZ Control Setting Up a PTZ Preset While in PTZ mode, select the PRESET SET button on the While in Live mode, right-click and select PTZ from the remote control to display the Set Preset window and context menu or press the PTZ button on the DVR’s assign the current position as a preset.
  • Page 15 Part 1 - Getting Started While in PTZ mode, place the mouse pointer close to Advanced Settings the bottom edge of the screen to display the PTZ Tools In PTZ mode, select a camera. Clicking Menu button and window. selecting Advanced PTZ loads the Advanced PTZ screen as shown below.

  • Page 16: Event Monitoring

    Part 1 - Getting Started Event Monitoring Status Refer to the Menu Use on page 20 for basic When an event occurs, the DVR automatically displays the channel linked to the event and shows the icon information on using the Setup menus. on the system status area on the bottom of the screen.
  • Page 17 Part 1 - Getting Started • Fan Error: Event is indicated when the cooling fan A disk that has never cannot reach a certain RPM or fails for longer than 50 Formatted been used before. seconds. • Disk performing • No Storage Found: It will be highlighted when no normally.

  • Page 18: Context Menu Access

    Part 1 - Getting Started Video Recording Context Menu Access Video recording will only take place if all the You can display the ContextMenu window by pressing connections are made correctly as per information the MENU button and then PLAY/PAUSE button on the contained in Part 2 of this operation manual.

  • Page 19: Audio Recording

    Part 1 - Getting Started Audio Recording Remote Control Buttons during Playback If the Record Audio option under Record Setup > General has been enabled the camera will record audio along with video. For more information, refer to the Record Setup on page 32. Camera Button: Displays the selected recording in full screen.

  • Page 20: Part 2 - Configuration

    Part 2 - Configuration Menu Use Use the remote control’s arrow buttons to select an option and then press the remote control’s $ button or left-click on the option using the mouse. Information contained in this section (Menu Use) applies to all other instructions found throughout Part Change the setting and then select Save to save the 3 - Configuration.

  • Page 21: Batch Assignment

    Part 2 - Configuration System Setup Batch Assignment Refer to the Menu Use on page 20 for basic Certain table-format menus such as the shown in the information on using the Setup menus. Camera Setup on page 41 allow you to change the title value.
  • Page 22 Part 2 - Configuration • Upgrade: Upgrade the system. If NetFS feature is • Show System Log: Displays a searchable list of 5,000 in use, click Upgrade. You can select the USB Port or most recent system log entries. For more information on types of system log entries, refer to the System NetFS.
  • Page 23 Part 2 - Configuration • Clear All Data: Erases all recording data. Selecting Quick Wizard Clear All Data displays a confirmation window. Select Clear to proceed. Select Quick Wizard. • Before you perform Clear All Data, make sure you are not accidentally deleting important data. Erased data cannot be recovered.
  • Page 24 Part 2 - Configuration Choose the desired Recording Method and click – Recording ips, quality, resolutions used under each recording method and record video quality setting are as Next. follows: High Video Standard Longer Recording Quality Priority Recording Profile Time Priority Profile Profile Motion...
  • Page 25 Part 2 - Configuration Select Network Configuration and then click Network Wizard Next. Select either Auto Configuration or Manual Configuration and then click Test to test the system’s After exiting from Quick Wizard, you can click Go to current network configuration. Network Setup and set up the network with Network Wizard.
  • Page 26 DVR. Once registered, the name can be used to access the DVR directly from clients such as the IDIS Center. Check the name's availability to complete the registration process. The Finish button will then become activated.

  • Page 27: Date/Time

    Part 2 - Configuration Date/Time Specify the server synchronization Interval. Select OK to apply and exit. • If you have configured the DNS Server setting under Network - IP Address, you can enter the time server's domain name instead of its IP address. •...

  • Page 28: User

    Part 2 - Configuration User Select + User and then enter a user name. Use this option to register users and assign permissions. Select a group for the user and then enter a password. The password can be 8~16 characters in length and may include numbers.
  • Page 29 Part 2 - Configuration Group Permissions System May change the system's date Time and time settings. May shutdown the system from Change System Shutdown the system menu. Data May clear data stored in the May upgrade the system from Clear system.

  • Page 30: System Event

    Part 2 - Configuration Storage System Event Use this option to configure storage settings. Use this option to configure Monitoring settings. • Settings: Configure when and what the system • Type: Indicates the type of the installed disk. should monitor for. •...
  • Page 31 Part 2 - Configuration Monitoring Options Specify the threshold Disk temperature. Once any disk Temperature reaches this threshold, the Define monitoring times. If self- system will issue an alert. diagnosis is not performed on System a regular basis, the system will Monitors disks that support assume an error.

  • Page 32: About

    Part 2 - Configuration Record Setup About Refer to the Menu Use on page 20 for basic information on using the Setup menus. General Configure general recording settings. • User Agreement: Click Accept and Use to agree to retaining the device data, and use the service. •...

  • Page 33: Schedule

    Part 2 - Configuration • Auto Deletion: Configure this option to delete Schedule recording data automatically after the specified number of days has elapsed. Select between 1 day and 999 days. To disable Auto Deletion, select Never. If enabled, recording data will be stored on the DVR for the specified number of days and then deleted automatically.
  • Page 34 Part 2 - Configuration Simple Mode Options Advanced Mode Options • Mode: Select No Record, Time, Event, or Time & Select to configure event types. Event. • Type: Event-specific and time recording icons are as follows: Unless the Panic Record button is pressed, no recording will take place Time Lapse Video Loss...

  • Page 35: Pre-Event

    Part 2 - Configuration Pre-Event • Upper-tier schedule's settings apply to unconfigured channels. • If multiple events take place on a specific channel When an event occurs, enabling this option includes and different ips, Quality, Resolution, and Dwell the specified duration prior to the event in the event- Time settings apply, highest settings apply to all triggered recording.

  • Page 36: Event Setup

    Part 2 - Configuration Event Setup Use the remote control’s arrow buttons to move the block selection window up, down, left, and right. The selection window consists of 4 blocks per row. Select/ Refer to the Menu Use on page 20 for basic deselect individual blocks using the Camera buttons.

  • Page 37: Tripzone

    Part 2 - Configuration • Motion Ignoring Time: The system does not produce Tripzone event log entries or issues remote notifications regarding motion detected during the specified time following the initial motion detection. Set a value between 1 sec and 10 secs or choose Never. Motion Ignoring Time does not affect motion detection recording.

  • Page 38: Alarm-In

    Part 2 - Configuration – Event Monitoring: Select a camera screen for monitoring when an event occurs. In order to use the Callback feature, the DVR must be registered on the remote program. • Daytime Setup: Specify when daytime starts and ends.

  • Page 39: Video Loss

    Part 2 - Configuration Video Blind In order to use the Callback feature, the DVR must be registered on the remote program. Video Loss • Sensitivity: Allow you to adjust the DVR’s sensitivity to video blind for Black and White independently from 0 (Never) and 1 (least sensitive) to 15 (most sensitive).

  • Page 40: Text-In

    Part 2 - Configuration Text-In • Line Delimiter: Designate a string to mark the end of a line. You can enter control strings by selecting and then entering ^, followed by a letter. For example, Carriage Return is ^M and Line Feed (new line) is ^J. •...

  • Page 41: Camera Setup

    Part 2 - Configuration Camera Setup Refer to the Menu Use on page 20 for basic information on using the Setup menus. You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485. General Enable/disable the covert view and rename cameras.

  • Page 42: Clip Privacy

    Part 2 - Configuration Privacy Masking • You will need to connect the camera to the RS232 or RS485 connector on the back of the DVR following the camera manufacturer’s instructions. Configure privacy masking zone for Live and Recording screen. Configure the port’s setting based on the PTZ camera manufacturer’s instructions.

  • Page 43: Device Setup

    Part 2 - Configuration Device Setup Alarm-Out Refer to the Menu Use on page 20 for basic information on using the Setup menus. Audio Select the + icon at the bottom left corner of the screen to add a schedule. You can apply different schedules for different Days of the week.

  • Page 44: Remote Control

    Configure to use different streams in layout mode or port such as PTZ control, networking or text input. channels in IDIS Center Client. The message says that you cannot use other device because the ports are overlapped.

  • Page 45: Lan

    The factory default Port settings are from 1024 to 65535. You will need to get the appropriate Port Numbers for each IDIS Center and IDIS Web related program (Admin, Callback, Watch and Search) from your network administrator.
  • Page 46 Part 2 - Configuration • Status: Indicates the number of the port forwarded DHCP by the IP router (or NAT) to the DVR via UPnP service. • Test: Select to test the current LAN settings you made. Select DHCP and then Save to retrieve IP address and other network settings automatically from the DHCP server.

  • Page 47: Fen

    • If the FEN name contains the #, \, and/or % symbol, it might not be able to connect to the DVR from the IDIS Web program. • Status: Used to check the status of the device being registered to the FEN server.

  • Page 48: Rtsp

    RTSP IDIS Web RTSP service allows you to monitor real-time using the IDIS Web service allows you to monitor and search video Real-Time Streaming Protocol. remotely without setting specific on-line programs. • RTSP Port: Set the port number of the RTSP server •...

  • Page 49: Vnc

    Part 2 - Configuration Function Pressing the ← or h key moves to VNC service allows you to access the DVR and control it the left in the menu. It is the same as ← or h remotely using a PC or mobile devices via Ethernet. pressing the Left arrow button on the front panel.

  • Page 50: Netfs

    Part 2 - Configuration NetFS It allows you to register NetFS sites for the following functions: • Upload or download of files for upgrade, import/ export of a setup file, log export, or file print on a FTP site. Related settings are as follows: (Setup) in the live monitoring mode - System menu - General tab - Upgrade, Import, Export (Export) in the search mode - Print...

  • Page 51: Notification Setup

    Part 2 - Configuration Notification Setup • Site: Enter NetFS site information. • When you delete a FTP site in the NetFS setup screen on the Network menu, the FTP site in the FTP setup screen on the Eventupload will be deleted, Callback too.

  • Page 52: Mail

    Part 2 - Configuration Mail Attach Type Setup Click Attach Type Setup to select the attach file name’s Configure Mail settings. encoding between Base64/PLAIN-TEXT. Select MP4 file size between 1 second or 5 seconds. SMTP Setup Select SMTP Setup at the bottom right corner of the screen to configure an SMTP server.

  • Page 53: Ftp

    Part 2 - Configuration • Upload File: Select among CBF, JPG, and MP4. When selecting CBF, the DVR will upload an event detected video clip on the FTP site. When selecting JPG, the DVR will attach the event detected image file (JPEG format) on the FTP site.

  • Page 54: Schedule

    Ethernet. The icon displays on each camera when audio communication is available between the DVR and a PC running IDIS Center via Ethernet. The icon displays when VNC service is running.

  • Page 55: Main Monitor

    Part 2 - Configuration Main Monitor Camera • No.: Displays the camera number on the upper left corner of the camera screen. Configure monitor-related settings. • Title: Displays the camera name on the upper left corner of the camera screen. •...

  • Page 56: Part 3 - Search

    Part 3 - Search Searching Video 1 Search Search by changing Event Log Search, Record Table Search, Motion Search, Text-In Search and Thumbnail While in the search mode, pressing the MENU button Search. displays the following Search menu on the right edge of the screen.

  • Page 57: Context Menu

    Part 3 - Search Context Menu 9 Camera Menu • Zoom: Zoom and choosing the camera number zooms the current playback image of the selected Right-click on the Camera screen to access the context camera on the screen. Right-click on the mouse and menu.

  • Page 58: Event Log Search

    Part 3 - Search Event Log Search If the system's clock has been changed and the designated From or To point exists at more than one location, you will have to choose one. Only the events Select Event Log Search from the Search menu to bring that took place between the selected From and To up the Event Log Search Setup window.

  • Page 59: Record Table Search

    Part 3 - Search Record Table Search 2 Zoom Select (zoom-in) to compose recording data in 1-minute segments and select (zoom-out) Select Record Table Search from the Search menu to to compose recording data in 3-minute segments. bring up the Record Table Search Setup window. Selecting zoom-out displays more time in one screen than zoom-in screen.

  • Page 60: Motion Search

    Part 3 - Search Motion Search 5 Bookmark Add the current playback point to the bookmark list. Select Motion Search from the Search menu to bring up The maximum number of bookmarks that can be the Motion Search Setup window. saved is 64.

  • Page 61: Text-In Search

    Part 3 - Search • The Zone setting can be configured in the identical Select Option... to configure Text-In Search options. manner as the Zone setting under System Setup - Motion Detection. For more information, refer to the Motion on page 36. Museum Search may not function properly if the edge of the object is included in the Zone.

  • Page 62: Thumbnail Search

    Part 3 - Search Thumbnail Search Bookmarks Select Thumbnail Search from the Search menu to bring Select Bookmarks from the Search menu to bring up the up the Thumbnail Search window. Bookmarks Setup window. • Select the (Go to) button to search an image of a certain date from the channel which had an Select the + icon to add a bookmark to the current interlocked recording.

  • Page 63: Clip Copy

    Part 3 - Search Clip Copy • Password: Enable password protection for the saved video clip and assign a password. • Dest.: Select which storage media to use. If NetFS feature is in use, you can upload video clip to the Clip Copy registered FTP site.

  • Page 64: Print

    2GB in size, each. • Clip Copy files can be played back on Windows systems. For more information, refer to the IDIS • Printer Model Center operation manual. – File Printer: Save the current frame to the USB •...

  • Page 65: Overlapped Recording Search

    Part 3 - Search Overlapped Recording Search If the system’s clock is changed to a point in the past, overlapping recordings may be produced. Overlapped recordings have to be searched in segments. For example, making a recording from 1 o’clock to 5 o’clock, changing the system’s clock at 5 o’clock to 3 o’clock, and then continuing to record until 6 o’clock produces two recordings that overlap between 3 o’clock...

  • Page 66: Part 4 - Idis Web

    Part 4 - IDIS Web IDIS Web is a program that allows you to view and search video from remote locations over the Internet and can be accessed on a regular web browser such as Internet Explorer. System requirements for running IDIS Web are as follows: •...
  • Page 67 IDIS Web program. • If running IDIS Web, the bottom section of the screen may get cut off if the address bar or the status bar is shown. In this case, change Internet Options so that the address bar or the status bar is hidden. (Tools → Internet Options →...

  • Page 68: Web Live Mode

    Part 4 - IDIS Web Web Live Mode A remote web monitoring program that allows you to monitor images from remote locales in real-time. Press to terminate WebGuard. Place the mouse pointer on the logo to check WebGuard’s version. Displays the current time.
  • Page 69 Part 4 - IDIS Web Select the camera you wish to monitor. Use the arrow buttons to navigate to the previous/next camera group. Used to control a PTZ camera at a remote location. Used to adjust live video quality. Controls remote alarm out devices.

  • Page 70: Web Search Mode

    & Press to terminate IDIS Web. Place the mouse pointer on the logo to check IDIS Web’s version. Displays time information of the video recording from the remote DVR. Select the desired mode. Click to print the current video screen using a printer connected to the computer.
  • Page 71 Part 4 - IDIS Web Click to switch over to Web Live mode. Shows login information. Select the camera you wish to search. Use the arrow buttons to navigate to the previous/next camera group. Zoom in or out on the video.
  • Page 72 Part 4 - IDIS Web Select a camera from the screen and right-click to bring up the pop-up menu. • Change Camera Title: Used to change the camera's name. Renaming the camera in Web Search mode does not affect the camera's name on the remote system.

  • Page 73: Part 5 - Appendix

    Part 5 - Appendix Index Recording Alarm-In Search Alarm-Out Storage Audio Recording Text-In Event Monitoring Text-In Search Video-Analytics 36, 37 Motion Search 58, 59 Mouse Panic Recording Pre-Event Print V1.3...
  • Page 74 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...

Table of Contents