Sony HDMI VPL-FE40 Operating Instructions Manual page 37

Setting items Functions
Panel Key Lock Locks all the control panel keys on the side panel of
the projector so that the projector can be operated only
with the Remote Commander.
To lock the control panel keys, set to "On."
When it is set to "On," keeping the ?/1 key on the
control panel pressed for 10 seconds turns the projector
on when it is in standby mode, and turns the projector
to standby mode when the power is on. If you press
and hold the MENU key for about 10 seconds when
the power is on, the lock will be released and "Panel
Key Lock" is automatically set to "Off."
Security Lock Turns on the projector's security lock function.
When set to "On," turns on the security lock function,
which locks the projector once a password has been
set.
For details, see "Security Lock" on page 24.
Notes
• Press the APA key when the full image is displayed on the screen. If the projected image includes
a black portion around it, the APA function will not work properly and some parts of the image
may not be displayed on the screen.
• You can cancel the adjustment by pressing the APA key again while "Adjusting" appears on the
screen.
• The picture may not be adjusted properly depending on the type of input signal.
• Adjust the "Phase," "Pitch," and "Shift" items in the Screen menu when you adjust the picture
manually.
Initial setting
Off
Off
The Function Menu
37