Advertisement
1
Assembling the Lower Section to the Base Stand
Insert the connecting rods on the bottom of the Lower Section (A) into
the connecting holes on the middle of the Base Stand (E) then fasten
together at the connecting loops with the Bolt & WingNut (F).
A
3 Assembling the Upper Section to the Middle Section
Insert the connecting rods on the bottom of the Upper Section (C) into
the connecting holes on the top of the Middle Section (B) then fasten
together at the connecting loops with the Bolt & WingNuts (F).
F
5 Connecting the Light Strings
Connect the Lighting String by inserting the connecting pins on the end
of the Light string & Branches (D) into the receptacle holes on the light
cords attached to the Upper Section (C). Then press together tightly
for a secure fit.
7 Assembling the Power Cord to the Adapter and Operating the Controller
Locate the Power Cord at the base of the Willow Tree. Insert the end of
the Power Cord into the end of Adapter (line up the pins) then press firmly
and screw down the cap tightly until secure. On the front cover of the
Controller is a press button with three functions-(1) STEADY ON
Orange (2) STEADY ON Purple (3) COLOR CHANGING from Orange
to Purple. Press for your desired function.
F
E
C
F
B
D
ASSEMBLY
2
Assembling the Middle Section to the Lower Section
Insert the connecting rods on the bottom of the Middle Section (B) into
the connecting holes on the top of the Lower Section (A) then fasten
together at the connecting loops with the Bolt & WingNuts (F).
4 Assembling the Light String & Branches
Insert the connecting rod at the end of each of the Lighting String &
Branches (D) into the connecting holes on the Upper Section of the Tree (C).
Note: It is recommended not to unravel the Light String & Branches until all
Branches are inserted into the Upper Section and plugged in.
6
Assembling the Branches
Unravel the Branches and let them fall naturally downward. Use the
diagram of the finished Tree on this Assembly Sheet as a reference
to best place the Branches on the Tree.
8 Assembling the Ground Stakes
Insert Ground Stakes (G) over the metal frame at 4 corners of the Base
Stand (E) then firmly into the ground.
B
A
D
D
G
E
F
Advertisement
