Advertisement
Quick Links
INST LL TION ND OPER TORS GUIDE
or Professional Series Landscape Lighting Transformers
Covers GL, MTP and GLP Series Transformers from 100 to 1200 watts
Made in the US
ELECTRONIC PRODUCTS DIVISION
JUSTIN, IN .
2663 No. Lee Avenue
South El Monte, CA 91733
626 444-4516 • Fax 626 444-9462
www.justininc.com
If you have a concern or problem with any Justin product, first contact your local distributor. For continuing or unresolved problems, contact factory technical
department at (800) 989-4517 between 8:00am and 4:00 pm PST, Monday through Friday
Advertisement
Summary of Contents for Justin MTP Series
- Page 1 626 444-4516 • Fax 626 444-9462 www.justininc.com If you have a concern or problem with any Justin product, first contact your local distributor. For continuing or unresolved problems, contact factory technical department at (800) 989-4517 between 8:00am and 4:00 pm PST, Monday through Friday...
- Page 2 MOUNTING INSTRUCTIONS Warning: Transformers must be installed in accor- dance with the National Electrical Code (NEC) and local codes. Failure to do so will void the warranty and may result in serious injury and/or damage to the transformer. 1. Find a suitable, flat-surfaced location to mount transformer, taking into consideration proximity to 120 volt AC power source.
- Page 3 300W 300W Justin GLP transformers come equipped with a 2-position output voltage switch. Set the switch using the following as a guide. HIGH - The correct setting in most cases. Provides expected lamp life while maintaining good brilliance.. LOW - Increases lamp life when fixtures are located very near the transformer and/or when fixtures total less than 1/2 the transformer’s rated wattage.
-
Page 4: Troubleshooting Checklist
WARRANTY WILL, AT THE OWNER’S OPTION, BE 1. Timer incorrectly set. See setting procedure. EXCHANGED WITH A NEW UNIT AND CHARGED AT Justin transformers are ready for use with a low volt- Circuit breaker on transformer trips OUR CURRENT PRICING, RETURNED FREIGHT COLLECT. -
Page 5: Mounting Template
4.00" 6.50" MOUNTING TEMPLATE INSTRUCTIONS 1) ATTACH TEMPLATE TO WALL AT DESIRED HEIGHT. 2) CENTER PUNCH OR DRILL AT KEYHOLE CROSS-HAIR MARKS. 3) USE AT LEAST TWO #10 SCREWS FOR MOUNTING LANDSCAPE LIGHTING TRANSFORMERS SOUTH EL MONTE, CA USA USE B FOR GL SERIES 100-200 WATT TRANSFORMERS Note: This template will only print to scale when printed on 8 1/2"...
Need help?
Do you have a question about the MTP Series and is the answer not in the manual?
Questions and answers