Determining Firmware Revision - AB Quality 22-COMM-E Product Release Notes

2 22-COMM-E EtherNet/IP Adapter Firmware v1.007
Determining Firmware
Revision
This section describes procedures to determine the firmware revision of
your 22-COMM-E EtherNet/IP adapter.
Using the External LCD HIM (22-HIM-**)
Step
1. Power up the drive. The
Parameters menu for the drive will
be displayed.
2. Press Sel key until the Device
Select menu is displayed, and then
press Enter.
3. Press Down Arrow to scroll to the
22-COMM-E adapter, and then
press Enter.
4. Press Sel key until the Diagnostics
menu is displayed. Press Down
Arrow to scroll to Device Version,
and then press Enter.
5. The present firmware version of the
converter is shown on the Firmware
line.
Key(s) Example Screens
Parameters
Groups
Linear List
Changed Params
DIAG PARAM
Device Select
and
Sel
DSI Devices
DIAG PARAM
DSI Devices
and
PowerFlex 40
22-COMM-E
Diagnostics
Sel
Events
and
Device Version
Device Items
DIAG PARAM DSEL
Device Version
22-COMM-E
Adapter
Series: A
Firmware: 1.006
DSEL MEM SEL
DSEL MEM SEL
MEM SEL