Advertisement
Quick Links
Advertisement
Summary of Contents for Kogan KATVCAR75LM
- Page 1 EASEL STUDIO TV CART WITH CABINET (SUITABLE FOR 49-75" TVS) KATVCAR75LM...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read the entire user guide before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. - Page 4 COMPONENTS A (x1) B (x1) C (x1) D (x2) E (x1) F (x1) G (x1) H (x2) I (x1) J Castors (x4) K (x2) L M6x12 Screw (x2) M M8x25 N M6x25 O M4x8 P Washer (x4) Screw (x4) Screw (x4) Screw (x2) Q Screw R Cam...
- Page 5 ASSEMBLY Step 1: Note: Lock the brakes on the casters (J) to avoid any sudden movements during installation.
- Page 6 Step 2: • Attach the parts (D) to part (E) using cam screws (S) and cam connectors (R). • Cover the cam screws using the screw covers (Q). Ensure the notch on the connector aligns with the screw...
- Page 7 Step 3: • Assemble the side plates (F, G) using cam screws (S) and cam connectors (R). Ensure panel (F) is positioned on the left side and panel (G) on the right side.
- Page 8 Step 4: Attach the cabinet to the stand and secure it in place using M6x25 screws (N) and washers (P) into the two lower installation holes. Note: Do not tighten the screws...
- Page 9 Step 5: • Tilt the cabinet up and using cable management strip, route the TV cables down the left side of the stand. • Lower the front of the cabinet and install and tighten M6x25 screws (N) and washers (P) into the two upper installation holes. •...
- Page 10 Step 6: • Ensure the 2 limiting screws are facing upwards and insert part (I) into the stand. • Secure part (I) in place using 4 M8x25 screws (M) and attach the 2 end caps (K). Note: If the TV is in the lower position the cable management strips will need to be shortened.
- Page 11 Step 7: Align the brackets (H) with your TV’s VESA holes and secure using supplied screws (“M-” set), Washer (M-E) and spacers (M-F, M-G) depending on required length. Too long Too short...
- Page 12 Step 8: Hook the TV with brackets installed onto the stand. Two people should carry the TV to prevent damage. Note: Centre the TV bracket arms between the two limiting screws. Once in place, use fasteners (O) to secure the brackets in place.
- Page 13 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...