COMPOUND CALIBER CCB-TDM-2220 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. COMPOUND Manuals
  4. Treadmill
  5. CALIBER CCB-TDM-2220
  6. Assembly instructions manual

COMPOUND CALIBER CCB-TDM-2220 Assembly Instructions Manual

Blk treadmill w/ 18.5” hd screen
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
CCB-TDM-2220
Caliber BLK - Treadmill
C A L I B E R S E R I E S
BLK TREADMILL W/ 18.5" HD SCREEN
with 18.5" HD Screen
S K U : C C B - T D M - 2 2 2 0
Owner's Manual
COMPOUND.
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.
F I T N E S S
E Q U I P M E N T

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CALIBER CCB-TDM-2220 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for COMPOUND CALIBER CCB-TDM-2220

  • Page 1 18.5” HD Screen S K U : C C B - T D M - 2 2 2 0 Owner’s Manual COMPOUND. CAUTION: Read all precautions and instructions before using this equipment. Save this manual for future reference. F I T N E S S...

  • Page 2: Table Of Contents

    Content Overview Drawing ......................2 SAFETY INSTRUCTION ....................3 2.1. Power Requirement ................... 5 2.2. Level Adjustment ....................6 2.3. Power Switch ..................... 6 2.4. Running Belt Adjustment ..................7 Assembly Instructions ....................8 3.1. Pre-Assembly Check List ................... 8 3.2.

  • Page 3: Overview Drawing

    1. Overview Drawing...

  • Page 4: Safety Instruction

    2. SAFETY INSTRUCTION When using this product, basic precautions should always be followed, including the following: Please read the instruction carefully before starting to use this product. ◼ DANGER – To reduce the risk of electric shock： Always unplug this product from the electrical outlet immediately after using and before cleaning.
  • Page 5 21 Users correct ergonomic position on the equipment shown in Figure 22 Before using this product, you should step on it then turn on the product. Do not turn on the treadmill before step on it. 23 Running surface is 555*1575mm 24 The appliance is intended for commercial use.

  • Page 6: Power Requirement

    2.1. Power Requirement ◼ This treadmill needs special power supply: Power Voltage（V） Frequency（HZ） Rated Current（A） 50/60 50/60 50/60 50/60 50/60 240+ 50/60 Wirings should be transported according to the electric law of the local country. High pressure wires, low pressure wires and underground wires should be transported separately and can’t connect with or twist other wires.

  • Page 7: Level Adjustment

    2.2. Level Adjustment The treadmill will wobble during workout and the incline angles will be affected if it is placed on uneven ground. The level adjustment method is as follows: Turn A anticlockwise to loosen it Adjust B to the proper height Turn A clockwise to tighten it.

  • Page 8: Running Belt Adjustment

    2.4. Running Belt Adjustment After assembling the treadmill, check the operation of the running belt. First, make sure the power supply is correct. After starting the treadmill, stand on the two sides of the pedal(At the very start, don’t stand on the running belt).Press QUICK START key and then increase the speed to 4.0MPH(6.4KPH) by pressing + key.

  • Page 9: Assembly Instructions

    3. Assembly Instructions Ready the operation instructions carefully before use, then choose a flat position to assemble. This treadmill also can use other way to account the HRC. When in fitness, user can wear the chest pulse belt and the HRC will show in Pulse windows. 3.1.

  • Page 10: Hardware Pack

    3.2. Hardware Pack ITEM Description Cks hex screw M10xP1.5x25 Truss hex screw∮13 Truss Philips Screw M5xP0.8x12 Screw Φ4x16 Philips screw M5xP0.8x15 Truss hex screw M8xP1.25x20 Spring washer M8 L hex wrench+ Philips Screwdriver 5mm L hex wrench 10mm L hex wrench 8mm CABLE Adapter Spring washer M4 Truss Philips Screw M4xP0.7x10...

  • Page 11: Assembly Steps

    3.3. Assembly Steps ◼ STEP 1 Release cross screw on frame(c) for motor upper cover fixing and take off upper motor cover, fix the truss hex screw of upright tube into gourd hole as figure 1-1 and push it forward. Then pull the control wire & other wires out with guide thread attached in upright tube and fix the upright tube L,R(D,E) with screw(a), but do not tighten.
  • Page 12 ◼ STEP 2 Make control wire& other wires through the hole of stuff holder set(B), make sure the wires is not pressed and fix the truss hex screw of stuff holder set(B）into gourd hole of upright tube as figure 2-1, push it forward.After finished, tighten stuff holder(B) with screw(b) and tighten the screw(a) that fixing the upright tube L,R.
  • Page 13 ◼ STEP 3 Hub plate connecting wire upper Control wire upper TV cable upper Power wire upper Internet cable upper Hub plate connecting wire lower Control wire lower TV cable lower Power wire lower Internet cable lower Put computer console(A) on stuff holder(B) as figure 3-2, connect the control wire & other wires of stuff holder(B) with wires of computer as figure 3-1.
  • Page 14 ◼ STEP 4 Power wire Internet cable wire Inset power wire into power wire socket as figure showing, then cover the power wire switch cover(n) and tighten with screw(m), spring washer(I). Finished as figure 4-1. Attention: cable transferring connector(o) is ready for TV cable systems using as figure 4-2 Internet adapter connector is prepared for the adaption of the internet system, as picture 4-2...

  • Page 15: Console Operation Instruction

    4. CONSOLE OPERATION INSTRUCTION This treadmill provides a convenient computer console, and users can input the personal information into the console and set the goal of the exercises. 4.1. computer console constructure_A liquid crystal screen section position section function instruction information status Show the information before, in, and after the display section...

  • Page 16: Computer Console Structure B. Practical Buttons

    4.2. Computer console structure B. Practical buttons Name of buttons Function instruction 1. At the standby page, press this button to enter into Quick start mode. 2. Under the pause condition, press this button to relieve pause and come back exercise mode. The speed and inclination will be back to QUICK START the status before pause.
  • Page 17 At the standby page, press to spread Fit Test selection list. Program control quick button – FIT TEST From the Standby page, pressing the button will take you directly to the Settings page for virtual reality mode. Program control quick button –...

  • Page 18: Computer Console Constructure_C External Device Section

    During exercise, the incline is preset to be closed. Press this key to start the incline adjustment function. After start, quick switch among 0-9 number keys. INSTANE INCLINE During exercise, the speed is preset to be start and switched among 0-9 number keys. Close by pressing INSTANT INCLINE.

  • Page 19: Display Screen Instruction

    C.4 earphone hole This hole can connect 3.5mm sound output device, such as earphone. If the cable for the earphone is not long enough and cause inconvenience during running, user can buy the 3.5mm prolonged socket yourself. C.5 fan air outlet 5.
  • Page 20 use or re-select the language. ※ After each reboot, the language will be restored to the factory defaults. The preset values can be set in the engineering mode. ※ During exercise, the language cannot be changed, unless back to the standby page. ：Wi-Fi signal receiving status ⚫...

  • Page 21: Standby Page

    5.4. standby page (1) Choose Quick start or other program in this page. Each time, after exercise, the system will come back to this page. (2) The current date and time will show on the left of the page. (The system has the inter-built battery, and the time will calculate according to the setting data;...
  • Page 22 ※Pair and connect the Bluetooth headset The pairing and connecting of Bluetooth headset is the same as the operation of Bluetooth on general mobile phones Check and make sure your Bluetooth headset is waiting for pairing (usually with blinking lights). When the Bluetooth headset is waiting for pairing, press the Scan button on this page, and the system will start searching for nearby Bluetooth devices.
  • Page 23 Press the Test button to check whether the Bluetooth headset can hear the Test sound normally. If the test is normal, please press the EXIT button to leave the Bluetooth Settings page. vii. Enter any exercise mode and start using the Bluetooth headset function. viii.

  • Page 24: Program Set Page

    5.5. Program set page (1) Under standby page, except Quick start, choose any of the programs to enter into the set page. (2) After entering into the set page, user still can choose other program under the set page. (3) Input the user’s age, weight, gender and other information to calculate in the formula of the program.
  • Page 25 change the exercise information to other backup information, for example, change the distance data to British system, heart rate change to max oxygen capacity, total calorie to calorie change per minute, time change to minute unit and so on. (Distance) Metric system, distance and speed show in km and kph.
  • Page 26 (2) When the multi-media mode is on, the middle of the page will switch to the film treating section, including film, website display and multi-media operation page. (3) Press key to show the menu of the multi-media list. Press key to close the list.
  • Page 27 media mode. (6) Adjust the volume. A-3 section: this section is main display section, including reminding information and ⚫ multi-media pages of all kinds of status. Treadmill mode: (1) Basic operation key, right key +/- is for speed adjustment, left key ↑/↓ is for incline change by pressing one time or pressing long time.

  • Page 28: Multi-Media Function

    mode, mirror casting mode, HDMI INPUT mode, video streaming website mode. 5.7. Multi-media function 5.7.1：DTV mode ⚫ This machine has a digital TV card, supporting DVB-T/T2, ATSC(8VSB &QAM B), just insert the Cable line containing TV signal into the machine, including the wireless signal channel accepted by the antenna, and the Cable signal channel set up by the machine room (need not encrypting), can watch TV programs in this mode.
  • Page 29 key again to show the exercise information and operation keys again. ⚫ On the right, there is control for channels, press it to bounce the TV channel control options, there are 2 ways to switch the channel: Press to switch the channels one by one. Directly click on the channel program name in the channel list in the screen.
  • Page 30 ⚫ Press key on the left tool column to shut down the current medial mode and back to the media choosing list to choose other media mode. ⚫ Adjust the volume. ⚫ The sound output in this mode only supports 3.5mm wired earphones, not Bluetooth headset.
  • Page 31 ⚫ Step.2 Above the page there will be the unique ID name of the internal-built mirror cast module. ( At the bottom of the page will be the setting position for the mirror cast of all brands of the mobile phones.) (Because of the different versions of the mirror casting, the sample images will be different.) Step.3-1 According to the instruction on image above or take the chart below for reference, enter into the setting list in the phone or tablet following the brand or system of the phone and...
  • Page 32 If there is any mistake for the above information, please take the public information from the ※ original manufacture as final. Step.3-2 Take Sony mobile phone as example, enter into setting page and click “device connection”. Step.3-3 Click “screen show simultaneously” and then press “start”...
  • Page 33 Step.4 The page on the phone/tablet will show the searched mirror cast module, as the range of the wireless signal is large and each machine has the unique ID. To avoid connection with other machine, please choose the ID same with the one show in the center of the machine page.
  • Page 34 (machine page) ⚫ Step.5 After finishing, the page on the phone/tablet will show on the machine screen simultaneously. the usage process of the mirror cast module please take the video below for reference. (Phone brand: Sony) https://drive.google.com/open?id=1EnvJ7X4FExMNzwZFYUoO55hoRLLOb6lF Example two: Apple device At the official mirror cast setting page, the user can slid the phone or pad from bottom to top to drag out the fast key page to click AirPlay program.
  • Page 35 Step.6 When the mirror cast is done, the page in the machine will show the page of the phone or pad, and then you can operate the phone in the machine directly. For example, check the photos in the phones or the video and other kind of contents. ⚫...
  • Page 36 (2) Press Stop on the machine to back to the standby mode, and the system will disconnect the mirror cast matching with the machine to protect the person privacy. (3) When the phone/tablet is away from the machine for 30 km, there is no signal for each side, and the system will disconnect the matching automatically.
  • Page 37 5.7.3 HDMI signal input mode Insert the HDMI device with HDMI Cable(Type A) into the HDMI input hole of the machine and enter the movement. Then select the HDMI mode from the multimedia mode menu of the screen. This product supports 1080P external HDMI Output devices, such as TV Digital Case, DVD Player, Notebook...
  • Page 38 ⚫ The center of the screen is the image display area. Press to hide the motion information and operation keys, and the image area will be displayed in full screen. Press again to display the motion information and operation keys again. ⚫...
  • Page 39 5.7.4 film streaming website mode ➢ 18 common websites are preset, including news information website, film streaming website and internet community. Users can click the icon to the website. ➢ YouTube ➢ NETFLIX ➢ ➢ ➢ ➢ IQIY ➢ Youku ➢...
  • Page 40 delete bookmarks of the website. For the demand, please ask the dealer to expand the way you can use the software update. ➢ This model uses the browsing interface of Google's native web version. Therefore, the operation on the webpage varies according to each website. If you want to input text, this model only supports the input of the original English letters of the Android operating system.
  • Page 41 again. If the data is close to or under 0kbps, it means the internet signal source is abnormal or unstable. ⚫ If the picture white to be normal connection url information page of Webpage (Webpage not available), or the picture has been turned around (loading), please check the network status, such as Internet signal source for physical network route, please confirm whether at the upper right of this picture shows pattern,...

  • Page 42: Exercise Process Page

    5.8. Exercise process page ⚫ When Quick Start or remote control, the time, target data come to zero or the exercise is finished, or stop by hand, the page will show the complete summary of the exercise this time. ⚫ The complete summary information includes 2 pages, you can click to switch, the first page show the exercise data and the second page show the exercise frame chart.

  • Page 43: Heart Detection Instruction

    Heart detection instruction According to research, keeping a stable heart rate to exercise is the best training method to monitor exercise intensity and realize highest intensity. And this treadmill can meet this demand. 6.1. Heart rate monitor system A. Hand grip sensor system (1) It means the heart rate monitor system, during exercise, by hand gripping the stainless steel sensor in the front handrail.

  • Page 44: Sectional Heart Rate Training

    6.2. Sectional heart rate training Set the ideal heart range or section to do aerobic exercise and strengthen the heart vascular function. The chart below is the conversion formula and the reference illustration for the sectional heart rate. 1%~54%：Low (Recovery) 55%~71%：Fat burn 72%~89%：Cardio 90%~100%：High (Anaerobic)

  • Page 45: Exercise Program

    Exercise program 7.1. Introduction of exercise program ⚫ Quick start mode, 3 sets of Goal program, 3 sets of Training program, 2 sets of Fit Test program, 8 kinds of virtual reality program, 5 sets of PFT program, 6 sets of HRC program. ⚫...
  • Page 46 (2) Under QUICK START mode, the max continue exercise time per time is preset as “360 minutes”, the time will run forward and when it’s over 360 minutes, the center of the page will show ” The exercise time has reached the maximum 360 minutes ”and the system will execute 3-minute Cool down automatically, and then the center of the page will show ”Cool down Auto running ”.
  • Page 47 and change continually。 4. random the change during the process： Generate in random, press key one time to reset within the range. ※Except for 4 kinds of the preset resistance change frames above, there is other valid way by touching choose to create frame for 12 minutes under the page among the 4 preset frames. Step.4 After setting, press start key to enter into exercise page.
  • Page 48 though you have chosen the same intensity, the data will be different each time. 5-3 The user can edit the preview and change the shape of each stage directly, and can also edit the incline, but limit within each LEVEL range. LEVEL %INCLINE LEVEL...
  • Page 49 (7) When the target is finished, the exercise will end, and the page will show the process page. 7.2.4. Automatic program_FIT TEST fit test Step.1 choose test target Fit Test Test the suitability of cardiovascular of different ages and gender by the intensity of exercise.
  • Page 50 Activity intensity-non-dynamic Activity intensity-highly dynamic young thin short high Recovery test ⚫ (1) The aim of the program is to analyze the health condition of the breathing organs by checking the change after a temporary and fixed exercise status. (2) During the execution, the speed and incline are controlled by the computer and cannot be changed manually.
  • Page 51 5. In the virtual active mode, the incline is preset as 0%, during the exercise, the speed and incline can be controlled manually according to personal demand, and the pause function is also valid. 6. In the virtual active mode, before and after the system will execute Warm up and cool down process, user can press Skip key to skip.
  • Page 52 7.2.6. Automatic program_PHYSICAL TEST Army physical fit test Step.1 Choose the standards of the tests 1. Superior Physical Test This program is based on the physical demands for U.S army, and the target is to finish 3.6km (2.24mile) and the system will do assessment according to the exercise time.
  • Page 53 While other army tests are manual adjustment of speed and incline. (6) During the program, the pause function in Gerkin Protocol is invalid, while other tests are valid. (7) Except for Gerkin Protocol, other tests should finish the target distance to finish test. If press Stop or cool down key before the distance has become zero, the test is suspended and the test result is Much to do or the lowest score.
  • Page 54 default default default default 197 124 124 31 180 113 113 49 162 103 103 67 145 92 196 124 124 32 179 113 113 50 162 102 102 68 144 91 195 123 123 33 178 112 112 51 161 101 101 69 143 91...
  • Page 55 (4) The increase and decrease scope for the computer console is 0.1%, when it accumulates to 1.0%, it will increase and decrease speed 1.0kph (0.6mph). (5) During the execution, the manual speed and incline is valid. (6) The program applies level stages (except for Fat burn HR and Cardio HR). The user increase and decrease the incline or speed by manual or automatic method to make the real heartbeat reach the target data.

  • Page 56: Program Setting

    Program setting enter and exit the engineer mode Entrance: after start, at this page, press for 5~8 seconds in time area, the screen will flash one time to enter into the engineer mode. Exit: at the engineer mode page, press the upper key.
  • Page 57 : Represents the detection status of the portable disk on the USB port. (when inserting a software update drive) Time setting Choose the local section, the system will choose the internet GMT time of the local automatically. The time is system time, and will show in the standby page. After setting of the time, please ensure the machine is connected with the internet;...
  • Page 58 4. Press on the right down, the page will show OSD setting screen. (If no OSD screen, it means the TV module has not been installed or the wire connection is abnormal.) 5. Press key, move cursor to ”Channel Search” program. (The following is a demonstration of the DVB-T specification) 6.
  • Page 59 and then to search the TV channel signal. 8. Please wait for the scan to 100%. ※ During the scanning process, the left screen will show the scanned channels’ information. ※ If no one was scanned out, please check whether TV Cable has plugged into the terminal of TV Cable.
  • Page 60 Wi-Fi setting 將 When the switch is set to ON, the system will display the detected Wi-Fi device (ID Name). The more cells the connection pattern is, the better the connection quality will be. Please select the target you want to connect to, enter the Wi-Fi password, press CONNECT button, wait for a few seconds, and wait patiently for the connection.
  • Page 61 Wi-Fi IP to the external network. Otherwise, you will not be able to find the Wi-Fi device or connect to the website normally. If you have other problems, please contact your dealer. ※ For the Wi-Fi and Ethernet MAC addresses of each machine, please see the version information bar on the right.
  • Page 62 Malfunction chart error possible cause Corrective Action remark code Turn on the power 1. The power turn off power for computer console 2. The light for Check whether the socket has the Check the power is off power. Voltage(110/220V) 3. no output of DC Change to new Inverter.
  • Page 66 ENDURANCE PHYSICALTEST - Fitness Charts Marine Corps Physical Fitness Test Points - Male Points 3-Mile Run 18:00 26:20 18:10 26:30 18:20 26:40 18:30 26:50 18:40 27:00 18:50 27:10 19:00 27:20 19:10 27:30 19:20 27:40 19:30 27:50 19:40 28:00 19:50 28:10 20:00 28:20 20:10...
  • Page 67 Marine Corps Physical Fitness Test Points - Female Points 3-Mile Run 21:00 29:20 21:10 29:30 21:20 29:40 21:30 29:50 21:40 30:00 21:50 30:10 22:00 30:20 22:10 30:30 22:20 30:40 22:30 30:50 22:40 30:00 22:50 31:10 23:00 31:20 23:10 31:30 23:20 31:40 23:30 31:50...
  • Page 68 PHYSICAL EFFICIENCY BATTERY - Fitness Charts Physical Efficiency Battery Scores - （MALE） 25-29 30-34 35-39 40-44 45-49 50-54 55-59 Score Flexibility %Body Weight Pushed 1.5 Mile Run 24.25 158.7 9.28 9.34 9.48 10.01 10.27 11.15 12.03 12.48 12.43 23.3 146.4 9.56 10.04 10.22 10.37 11.12 11.59 12.57 13.34 13.57 22.7...
  • Page 69 Physical Efficiency Battery Scores - （FEMALE） 25-29 30-34 35-39 40-44 45-49 Score Flexibility %Body Weight Pushed 1.5 Mile Run 25.75 83.3 11.36 11.45 11.59 12.19 12.95 14.09 15.22 24.75 75.8 12.25 12.03 12.57 13.25 14.32 15.32 16.39 24.3 70.9 12.59 13.04 13.39 14.03...
  • Page 70 IPPT - Fitness Charts For Man:...
  • Page 71 For Woman:...
  • Page 72 Gerkin Protocol- Fitness Charts Male VO2 MAX (values in ml/kg/min) much to do poor fair good excellent superior <35.0 35.0 - 38.3 38.4 - 45.1 45.2 - 50.9 51.0 - 55.9 >55.9 20-29 <33.0 33.0 - 36.4 36.5 - 42.4 42.5 - 46.4 46.5 - 52.4 >52.4...

  • Page 73: Series _Tft Model _ Bluetooth Output Sound Function Description

    10. 22 series _TFT model _ Bluetooth output sound function description Introduction: (1) This product uses Bluetooth pairing method to output the multimedia sound of electronic watch to the Bluetooth headset (or speaker) on the user side. (2) The Bluetooth output function of this product varies slightly depending on the year of shipment: A.
  • Page 74 ▲ 1-4 In THE STANDBY MODE OF the electronic meter, press the "Bluetooth button" in the upper right corner of the screen to enter the Bluetooth device connection/pairing page. ▲ 1-5 Select "Bluetooth Headset Design TAB" 。...
  • Page 75 ▲ 1-6 Press the scan key below the screen of the electronic meter. The message next to the key will say "SCANNING", indicating that the machine is searching for a nearby Bluetooth headset (or speaker) to pair with. ▲ 1-7 When the list on the left side of the screen of the electronic meter all Bluetooth device IDs, Please click the name of your Bluetooth headset (or speaker), The machine will start to pair and connect with your Bluetooth device.
  • Page 76 prompt tone, so that you can judge whether the connection is successful. OUND OUTPUT AND RECEPTION CHECK ▲ Press the "test key" below the Bluetooth headset pattern on the screen of the electronic meter to check whether your Bluetooth headset (or speaker) can hear the test tone emitted by the system.

Table of Contents