Table of Contents
Advertisement
severe internal burns in just 2 hours and can lead to
death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely,
stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
13.3
3D Settings
Automatic Switching
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future. You can
change this setting in the Setup menu later.
• To switch to 3D automatically, select Automatic.
• To show a notification first, select Notification only.
• To never switch to 3D, select Never.
To change this setting...
1 - Press , select All Settings and press OK.
2 - Select 3D and press (right) to enter the
menu.
3 - Select Switch to 3D and
select Automatic, Notification Only or Never.
4 - Press (left) repeatedly if necessary, to close
the menu.
Stop 3D
To stop watching 3D...
1 - Press .
2 - Select 3D Format > 2D, and press OK.
3D is switched to 2D when you switch to another
channel or connected device.
2D to 3D conversion
With 2D to 3D Conversion, you can watch 3D all the
time. The TV creates 3D artificially from a 2D signal.
To watch 3D from a 2D signal...
1 - Press .
2 - Select 3D Format > 2D to 3D conversion, then
press OK.
To switch off 2D to 3D conversion...
1 - Press .
2 - Select 3D Format > 2D, then press OK.
3D Format
When the TV switches to 3D or when a notification is
shown that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal
tag is missing), the 3D programme is shown as a
double image on screen.
To select the appropriate setting to get a correct 3D
picture...
1 - Press .
2 - Select 3D Format > 3D - Side by Side, 3D -
Top / Bottom, 3D - Side by Side Inverted, or 3D -
Top / Bottom Inverted , then press OK.
13.4
Optimal 3D Viewing
For an optimal 3D viewing experience, we
recommend that you:
• sit at least 3 times the height of the TV screen away
from the TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or
certain energy saving light bulbs which operate on a
low frequency) and direct sunlight as they may
interfere with the 3D experience.
13.5
Care of the 3D Glasses
• Do not use cleaning chemicals containing alcohol,
solvent, surfactant, or wax, benzene, thinner,
mosquito repellent or lubricant. Using these
chemicals can cause discoloration or cracks.
• Do not expose the 3D glasses to direct sunlight,
heat, fire or water. This may result in a product
malfunction or fire.
• Do not drop, bend or apply force to the lenses of
the 3D glasses.
• Use a clean soft cloth (microfiber or cotton flannel)
to clean the lenses to avoid scratching them. Never
spray cleaner directly onto the 3D glasses. This may
damage the electronics (for Active 3D glasses).
• Do not use cleaning chemicals containing alcohol,
solvent, surfactant, or wax, benzene, thinner,
mosquito repellent or lubricant. Using these
chemicals can cause discoloration or cracks.
42
Advertisement
Table of Contents
