Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GlammFire Hyperion
Summary of Contents for GlammFire Hyperion
- Page 1 Hyperion Instructions Manual...
- Page 2 Thank you for purchasing a GlammFire product. In order to activate your 2-year GlammFire warranty, please register your GlammFire product at www.glammfire.com/pt/sobre/garantia or complete your warranty card and send it to us along with a purchase copy, to our address, within 30 days after the purchase.
-
Page 3: Table Of Contents
INDEX 1-Material supplied………………………………………………………………………………………………………………………………………..……………..4 2-Components…………………………………………………………………………………………………………………………………………………..………..5 3-Important safety information………………………………………………………………………………………………………………………………..……..6 4-Installation.……………………………………………………………………………………………………………………………………………………………..8 5-Transportation.…………………………………………………………………………………………………………….……………………………..…....13 6-Gas requirements…………………………………………………………………………………………………………………………………..…..……….13 7-Assembly……………..………………………………………………………………………………………………………………………………………………..14 8-Leak test…….……..…………………………………………………………………………………………………………………………………..………………..14 9-Operating instructions..................................15 10-Checklist of problems ...................................21 11-Maintenance ………………................................23 12-General dimensions ..................................25 13-Specifications ..….…………………………………………………………………………………………………………………..……….……….…………..26 14-After-Sales Service……………………………………………………………………………………..…………………………………….……..………………27 15-Warranty………………..…………………………………………………………………………………………………………………………..……...…………27... -
Page 4: 1-Material Supplied
1-MATERIAL SUPPLIED 1—Deflector 2—Top part 3—Bottom part 4—Remote control and battery 5—Cinta 6—Tubular glass 7—4x cap nuts M6 8—9x M4 nuts 9—4x M8 screws 10—Protection grid 11— Heat diffuser 12—Locking ring... -
Page 5: 2-Components
2-COMPONENTS Ignition assembly —1 Receiver/ Battery operated option (DC)—2 Valve—3 Burner power connection—4 Ceramic burner—5 Lighter (Piezo)—6 Pilot—7 Thermocouple—8... -
Page 6: 3-Important Safety Information
Repairs should only be carried out by a qualified technician, using only original parts and always using the technical manual provided GlammFire. Improper installation, adjustment, alteration can cause personal injury or property damage. Do not attempt to alter the unit on any manner. - Page 7 The whole gas system, hose, regulator, pilot or burner should be inspected for leaks or damage before use, and at least annually by a qualified service person. All leak tests should be done with a soap solution. Never use an open flame to check for leaks. Do not use the heater until all connections have been leak tested.
-
Page 8: 4-Installation
4—INSTALLATION ATTENTION: All installation procedures must be carried out by a qualified technician. Heater must be placed on level firm ground. Make sure that the installation follows all local safety and construction norms and regulations. WARNING: Improper installation, adjustment, alteration, repair or maintenance can cause injury or property damage. Please read the installation, operating and maintenance instructions carefully before installing or servicing this equipment. - Page 9 Heater Installation Locations Safety Distances 1. Outdoor installation without two 2. Outdorr installation without adjacente walls. two opposite walls. MIN. 39.4 inch. 3.3 ft. MAX. 2.5M | 98.4 inch | 8.2 ft Keep a minimum distance of 1 meter to the side and 3.Outdoor instalation with at least 4.Outdoor installation.
- Page 10 First, place the top part on the bot- tom part so that the upper one en- gages the lower being the inner holes aligned. Then use the supplied M8 screws to secure the two parts through the holes located inside the bottom part.
- Page 11 To secure the tubular glass completely, use the fixation frame and tighten it with the help of three supplied M4 nuts. Insert the tubular glass in- side the appliance through the top opening. Note: Make sure that the end of the glass with the heat seal is facing down.
- Page 12 Then place the heat diffuser, as shown in the im- Place the protective grille and tighten using the age below, using four supplied M4 nuts. supplied M4 nuts.
-
Page 13: 5-Transportation
Position the deflector and secure with the help of the four cap 5-TRANSPORTATION nuts M6. To transport the appliance, tilt it slightly to the side of the Note: Annually, you must clean all the components. In order to do wheels. Use the hole located in the middle of the appliance that, disassemble the model using the same procedure in a reverse to place your hand and assist in the movement, as shown in way. -
Page 14: 6-Gas Requirements
6-GAS REQUIREMENTS - Use propane, butane or their mixtures gas only. - The pressure regulator and hose assembly to be used must conform to local standard codes. - The installation must conform to local codes, or in the absence of local codes, with the standard for the storage and handling of liquid petro- leum gases. -
Page 15: 8-Leak Test
Do not use the patio heater until the leak has been corrected. If you need more information about installing your Gas Fire Pit, please contact an Official GlammFire Retailer. To find a GlammFire Official Retailer, please visit: www.glammfire.com... - Page 16 9.1—REMOTE CONTROL ON/OFF The remote control has the functions of switching the appliance on/off and increasing/ reducing the flame. DOWN Technical data Notice: Ambient temperature range Wiring of valve and receiver must be completed CSA: 32ºF to 131ºF before starting ignition. Failure to do so could CE: 0ºC to 55ºC damage the electronics.
- Page 17 Warning: Without using a mains adapter, battery replacement is recommended at the beginning of each heating season. Old or dead batteries should be removed immediately. If left in the unit the batteries can overheat, leak, and/or explode. Do NOT expose batteries to direct sunlight, excessive heat, fire, moisture, or severe impact. Each of these conditions can cause the batteries to overheat, leak, and/or explode.
- Page 18 9.1.1—MODES OF OPERATION STANDBY MODE (PILOT FLAME): TURN FIRE ON AND OFF Press and hold the button until two short beeps confirm the Press and hold the “-” button to set appliance to pilot flame. start sequence has begun; release button. Main gas flows once pilot ignition is confirmed.
- Page 19 FLAME HEIGHT ADJUSTMENT DESIGNATED LOW FIRE AND HIGH FIRE To increase flame height press and hold “+” button; To go to high fire, double-click “+” button; To decrease flame height or to set appliance to pilot flame, To go to low fire, double-click “-”button. press and hold “-”...
- Page 20 9.2-TO TURN OFF GAS TO APPLIANCE If gas control is accessible turn main valve knob to the OFF full clockwise position. AUTOMATIC TURN DOWN 3 Hours No Communication Function The valve will turn to pilot flame if there is no communication between handset and receiver for a 3 hours period. The fire will continue to function normally when communication is restored.
-
Page 21: 10-Checklist Of Problems
10-CHECKLIST OF PROBLEMS PROBLEM CAUSE OF THE PROBLEM SOLUTION Turn on the gas valve Gas valve may be OFF Check remote control batteries Check controller batteries Empty gas bottle Change gas bottle Pilot does not turn on Opening blocked Clean or replace opening Air in the supply system Purge air (action to be performed by a technician) Loose connections... - Page 22 Turn on the gas valve Closed gas valve Check remote control batteries Checking the receiver's batteries Low pressure Bottle almost empty. Change bottle. The Burner does not turn on Locked burner gas outputs Clean or unblock burner gas outlets Defective thermocouple Contact retailer Pilot light assembly bent Place pilot properly...
-
Page 23: 11-Maintenance
11—MAINTENANCE ATTENTION: All maintenance procedures must be performed by a properly qualified technician. If something is spilled on the appliance, turn it off immediately and wait for its cooling before cleaning it. Never use scouring powder, aggres- sive cleaners or fire polish products on the gas fire. Use only a dry lint free cloth. 11.1 -Weekly Maintenance When the appliance is frequently used, clean the combustion area and stones weekly, so it does not accumulate any kind of residue or soot. - Page 24 Glass cleaning Broken glass replacement To replace the broken tubular glass it is necessary to proceed as To clean the tubular glass, you must remove the upper assembly in the claning process. So remove the componentes from the (deflector, heat diffuser, fixing ring and protection grille). In order upper assembly (if necessary consult the assembly chapter).
-
Page 25: 12-General Dimensions
12-GENERAL DIMENSIONS... -
Page 26: 13-Specifications
13-SPECIFICATIONS Transportable terrace/garden heater with tank housing. Casing in steel with power-coating or in stainless steel. Heat emission from reflector. Use propane, butane or their mixtures gas only. Power max.: 12 kW Gas rate max: Butane: 870 g/h | Propane: 820 g/h Appliance category* 3+(28-30/37) 3B/P (30) -
Page 27: 14-After-Sales Service
GlammFire follows the policy of the 4R's (Reduce, Reuse, Recycle and Recover). Thus GlammFire have in mind the use of long lasting products as well as reusable and recy- clable products.
Need help?
Do you have a question about the Hyperion and is the answer not in the manual?
Questions and answers