Table of Contents
Advertisement
en-us Troubleshooting
Issue
E:90-01 lights up al-
ternately.
E:92-40 lights up al-
ternately.
A different error
code appears in the
display window.
E:01-00 to E:90-10
Dishware is not dry. No rinse aid used or dosage set too low.
40
Cause and troubleshooting
Power voltage is too low.
There is no problem with the appliance.
Call an electrician.
1.
Have the power voltage and electrical installa-
2.
tion checked by an electrician.
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 36
There is a technical issue.
Press
1.
Pull out the power cord plug of the appliance or
2.
switch off the breaker.
Wait at least 2 minutes.
3.
Insert the power cord plug of the appliance in a
4.
power outlet or switch on the breaker.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service → Page 52 and
‒
give the error code.
Add Rinse aid → Page 21 .
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 22
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
Select a wash cycle with drying. → Page 13
▶
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
.
.
Advertisement
Table of Contents
