Page 2
Triboro Bridge. The unit must be powered to pass signal, even in bypass. The Triboro Bridge features buffered analog bypass. Connect an instrument cable from your instrument to the Input jack. Connect an instrument cable between the Output jack and a suitable amplifier.
Page 3
Note: when Gain is maxed out in fuzz mode, the 7. Input Jack Impedance: 2.2MΩ, Max In: +1.5 dBu Triboro Bridge will make a lot of noise when you’re 8. Output Jack Impedance: 680Ω, Max Out: +2.1 dBu not playing. Either activate the Gate knob or dial back the Gain knob.
Page 4
Questions about this product? Email: info@ehx.com...