walraven 6901975 Assembly Instruction

Part no. 6901998 (ISO Kit for female thread units)
Installation
Note: This assembly set is only required for devices
with female thread on the underside to mount the unit
Step 1:
Unscrew the dampers from the standard Wall Mounting Set including slide nuts.
1
The U-washers, round washers and nuts are not needed, take them off.
Step 2:
Screw the dampers (handtight) on the U-shaped brackets in the open hole by
2
using the slidenuts.
Step 3a:
Mount the brackets on the female thread of the unit.
Slide Nuts need to be straight with the bracket.
There are two types of brackets, type 1 with the damper in the middle and type 2
with the damper at the end. Type 1 needs to be positioned on the inner side.
3a
3b
Step 3b:
Position the unit with the mounted U-shaped brackets on the Wall Mounting Set.
90°
Push the screw down and turn 90° to close the fasteners
(check the right fit before tightening; T = 40Nm).
M8: 25Nm
M10: 40Nm
walraven.com
Type 1 Type 2
Walraven Wall Mounting Set 62 | H
ISO hdg L = 750 mm and L = 900 mm
Part No. 6901975 (L = 750 mm), 6901990 (L = 900 mm)
and 6901998 (ISO Kit for female thread units)
EN Assembly instruction PT Instrução de montagem
DE Montageanleitung PL Instrukcja montażu
NL Montage-instructie CZ Montážní návod
FR Instructions de montage SK Montážny návod
ES Instrucciones de montaje RO Instrucțiuni de montaj
Part No. L (mm) Fa,z (kg)
6901975 750 120
2x
4x 4x 4x 4x 4x
2x
2x
2x
2x
Part No. L (mm) Fa,z (kg)
6901990 900 180
2x
4x 4x 4x 4x 4x
2x
2x
2x
2x
UK ES
+44 1295 75 34 00 +34 93 721 33 75
DE +49 921 75600 PL +48 12 684 00 95
NL
+31 297 23 30 00 CZ / SK +420 326 724 009
BE HU
+32 16 82 20 40 +36 1 920 2458
FR UA
+33 4 76 04 10 70 +380 44 351 27 47
walraven.com
UA Інструкція з монтажу
DK Monteringsvejledning
SE Monteringsanvisninga
NO Montasjeanvisning
IT Istruzioni di montaggio
US CN +86 21 5176 0268
+1 800 610 5056
DK SG +65 6970 0605
+45 46 37 05 10
SE
+46 40 36 54 20
NO Other countries
+45 46 37 05 10
GR
+30 210 6008565 +31 297 23 30 00