Download Print this page

Advertisement

Quick Links

Intended for high traffic environments, this quad bath tissue dispenser offers a four tissue roll capacity while maintaining minimal roll exposure.
1. DISPENSER MOUNTING
See the reverse side for the mounting instructions and the mounting
template.
2. DISPENSER COVER
The cover can be opened with the supplied key that is included in the
package. Insert the key into the slot on the top of the cover. Twist and
pull forward and the cover will open.
3. PAPER ROLL LOADING & START-UP
For use with the LoCor bath tissue only (SKU numbers 26821 and
26824). Other types of tissue are not acceptable.
For the start-up, first open the cover. Each side of the dispenser can
contain two rolls, one on top and one on the bottom. To load the
top rolls, first swing the top mandrels forward, install the rolls of
tissue onto the mandrels, then swing the mandrels back to the
horizontal direction (Figure 1).
To load the bottom tissue rolls, slide the bottom mandrels outward
and then install the rolls onto the bottom mandrels. Slide the bottom
mandrels back until the rolls are in contact with the back of the body
(Figure 1).
FIGURE 1
LOCOR®4 BATH TISSUE DISPENSER USER GUIDE (SKU NUMBERS D67051, D67052, D67053)
Loosen the "paper tails" on the four tissue rolls (the "tails" are glued
to the rolls initially). Be sure that the "tails" of the bottom rolls are
visible at the bottom of the dispenser. Close the cover. The dispenser
is now ready to dispense.
4. RESERVE ROLL ACCESS
When there is no more tissue on the bottom rolls, push the bottom
mandrels all the way to the back of the dispenser and the reserve
rolls will drop down.
9. DIAGNOSTICS
If there is no more tissue on the bottom rolls and the bottom
mandrels cannot be pushed backward (which prevents you from
using the reserve rolls), open the cover for examination. Do not use
extra force on the mandrels; that may result in broken parts.
For further assistance, contact technical dispenser support at
(920) 940-8904.
TOP MANDRELS
BOTTOM MANDRELS
8779002
Released October 24 2019

Advertisement

loading

Summary of Contents for LOCOR D67051

  • Page 1 LOCOR®4 BATH TISSUE DISPENSER USER GUIDE (SKU NUMBERS D67051, D67052, D67053) Intended for high traffic environments, this quad bath tissue dispenser offers a four tissue roll capacity while maintaining minimal roll exposure. 1. DISPENSER MOUNTING Loosen the “paper tails” on the four tissue rolls (the “tails” are glued See the reverse side for the mounting instructions and the mounting to the rolls initially).
  • Page 2 Mounting Template Mounting Instructions Tools:  Screwdriver  Power Drill with appropriate drill size  Mounting Holes Pencil  Level and Tape Measure Step 1 Measure a minimum of 18” from the floor to the bottom of the dispenser, as marked on template.

This manual is also suitable for:

D67052D67053