Subscribe to Our Youtube Channel
Related Manuals for KYLAND Technology PTS-10
Summary of Contents for KYLAND Technology PTS-10
- Page 1 PTS-10 Time Server Operation Manual Kyland Technology (Shanghai) Co., Ltd. Version Copyright...
- Page 2 Kyland Technology (Shanghai) Co., Ltd. Room 802, Building 5, No.3000 Longdong Avenue Pudong District, Shanghai, China Tel: +86-21-80321288 Fax: +86-21-80321289...
-
Page 3: Table Of Contents
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Contents 1. Basic Features ......................2 1.1. Introduction ....................2 2. LCD ..........................3 2.1. Main Screen ....................3 2.1.1. Time Infomation ................... 3 2.1.2. Status Infomation ................. 3 2.2. Indicator Light and Keys................3 2.3. -
Page 4: Basic Features
1.1. Introduction [Figure 1-1] PTS-10 Time Server The PTS-10 Time Server is a standard time server. It supports high precision reference clock, which can be synchronized to absolute time such as GPS, BDS, and GLONASS etc. Built-in TCXO, OCXO helps to provide stable reference frequency source. System... -
Page 5: Lcd
2014-01-01 09:00:00 M GPS 08-OK-3D LOCK [Figure 2-1] PTS-10 Main Screen The screen has two line characters. The top line always shows the time information and PTP clock information. The bottom line shows time server status including time source status, clock status, position information and version information. -
Page 6: Status Indication
] System Time (DST) 2.3.2. PTP Information The PTP clock status is shown at last part of top line. This line is fixed. The PTS-10 might work in one of the following modes: Master PTP Grandmaster Clock Slave PTP Slave Clock... -
Page 7: Source Information
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server 2014-01-01 09:00:00 B PTP 000-000-P2P LOCK [Figure ] PTP Information 2.3.3. Source Information The time source status is shown at bottom line. The display contents will be changed by LEFT or RIGHT key. - Page 8 Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server HD: Hold over. Just lost the tracking to satellites, but time accuracy should be OK. No: No fix. No satellites are tracked. 2014-01-01 09:00:00 M BDS 08-OK-3D LOCK [Figure ] Sync Source: BDS...
-
Page 9: Clock Information
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server [Figure ] Sync Source: IRIG-B-DC Use PTP as sync source (i.e., the PTS-10 can work as PTP Slave Clock or Boundary Clock), the display format is shown below: PTP xxxx xxxxx xxx xxxx(1 PTP Offset value, the unit is ns. -
Page 10: Position Information
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server 2014-01-01 09:00:00 M GPS 08-OK-3D RCVR [Figure ] Time Setting Mode (RCVR) 2014-01-01 09:00:00 M LOCAL No Source HOLD [Figure ] Hold Mode (HOLD) 2.3.5. Position Information When get the satellite information from satellite source, system will show the position information including longitude, latitude and height. -
Page 11: Operations
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Operations 3.1. Settings LCD screen might show data by ‘LEFT/RIGHT’ key. Press‘Enter’key on any screen might enter setting screen to change setting. When change any options in the setting screen, user can use the navigation button ‘LEFT’ and ‘RIGHT’ key to switch the settings page. -
Page 12: Source Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Password Check Screen Use ‘LEFT/RIGHT’ key to select password, then press ‘Enter’key to confirm. NOTE: The default password is 8. Enter Password : 0123456789 [Figure ] Enter Password Screen Password Invalid Screen... - Page 13 Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server SAT2-T SAT2-M SAT2-A SAT2-T: UBLOX5 [Figure ] Source Setting: Page 2, 3 Name Description Parameter Note UBLOX5/UBLOX8/AT SAT1-T SatelliteType 3340/HWA210B/HW Set satellite receiver model. SAT2-T A210L Auto/A-BDS/A- SAT1-M SatelliteMode GPS/A-GLN/F- Set satellite receiver working mode.
-
Page 14: Clock Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server B2CHA B2FOR B2OFF B2CHA: FI2 [Figure ] Source Setting: Page 8, 9 Name Description Parameter Note B1CHA IRIG-B1/2 Input FI1/FI2 To set IRIG-B1/B2 input time signal. B2CHA To set IRIG-B1/B2 input format,... -
Page 15: Ntp Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Start : 1 MON MAR 02:00 Start Index: 1 Stop : 1 MON MAR 02:00 Stop Index: 1 [Figure ] Clock Setting: Page 3 Name Description Parameter Note Index MON/TUE/WEN/ Weekday /FRI/SAT/SUN Start DST Set start date of DST. -
Page 16: Ptp Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server 3.5. PTP Settings MODE DELAY LOG-S LOG-D MODE: Master [Figure ] PTP Setting: Page 1 Name Description Parameter Note MODE PTP Mode Master/Slave Set PTP working mode. /Boundary Delay Set clock delay measurement mode or... -
Page 17: Output Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server VLAN VLAN-P VLAN-CFI VLAN: No [Figure ] PTP Setting: Page 4 Name Description Parameter Note VLAN Enable Vlan Yes / No Set whether to send vLan information. VLAN-P vLan Priority Set vLan priority. -
Page 18: O1-O5 Output
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server set to UTC/TAI/Localtime. RMC,ZDA,DL/T1100, Set the coding format for serial port TYPE SO Message CM-TOD,CMBB message. Set the working baud rate for serial BAUD SOBaudRate 300~115200 port, ranging from 300 to 115200. -
Page 19: Network Settings
192.168.0.111 192.168.0.111. Set ETH0 Subnet mask address, the Mask Address 255.255.255.0 default is 255.255.255.0. PTS-10 can provide more network type. Auto/Force One of them can set ETH0 mode work with Auto or Force. Auto, Network Mode PTS-10 can provide more network 100M-FX FDX, types. -
Page 20: Default Settings
Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server 100M-FX FDX, types. One of them can set ETH1 mode 100M-FX-HDX, work with Auto or work with 100M and 1000M-X FDX, 1000M fiber. 1000M-X HDX IP1 :192.168.2.111 [Figure ] Network Setting: Page 3... - Page 21 Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Press ‘ENTER’ key to set new password and confirm password. If want to cancel this operation, please press ‘ESC’ key to cancel this operation. Notes: The password is made up of four digital.
- Page 22 Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server Figure Index [Figure 1-1] PTS-10 Time Server ....................2 [Figure 2-1] PTS-10 Main Screen ....................3 [Figure 2-2] PTS-10 Time Information..................3 [Figure 2-3] PTS-10 Status Information ..................3 [Figure 2-4] System Time (LOCAL) ....................4 [Figure 2-5] System Time (DST)....................4 [Figure 2-6] PTP Information ....................5...
- Page 23 Kyland Technology (Shanghai) Co., Ltd PTS-10 Time Server [Figure 3-11] Clock Setting: Page 2 ..................12 [Figure 3-12] Clock Setting: Page 3 ..................13 [Figure 3-13] NTP Setting: Page 1................... 13 [Figure 3-14] PTP Setting: Page 1 ................... 14 [Figure 3-15] PTP Setting: Page 2 ................... 14 [Figure 3-16] PTP Setting: Page 3 ...................
Need help?
Do you have a question about the PTS-10 and is the answer not in the manual?
Questions and answers