Advertisement
Technical Information
W/
This bulletin is provided for technical reference and service related updates. If you have any questions, comments or do not wish to receive these e-mails, please reply to this e-mail or call
the Service Technical Support Group 800 478-1244.
To view any faults that might be present, Push the Program/Exit Button on the ECU controller and select the
Fault Diagnostics menu. Select from the options below.
Diagnostics Menu 1 (DM1) to view the Active Faults that are currently present.
Diagnostics Menu 2 (DM2) to view the Stored Faults that have previously occurred.
Last Shutdown Displays the messages and/or codes that might have caused the last shutdown.
To remove the unit from Diagnostic Mode, move the OFF/RESET switch to the center position.
Do not leave switch in MANUAL position and disconnect
!
the battery, it could result in damage
TI_DCA_Generators_ECU800_Diagnostic_Mode.docx
Product Group:
Model:
2
Generators
DCA Generators
08/31/2017
Advertisement
