Advertisement
Description of Controls
1. Timer
2. Speed Control Buttons
3. Oscillate Button
Assembling Your 30 Inch Tower Fan
Whilst assembling your tower fan, place a cloth or similar underneath it to
prevent damage to the outer casing.
3
Attach the stand
onto the base of the
tower fan by
threading the screws
through the stand
assembly and into
the base of the
tower fan.
1
Place the rear
section of the stand
onto the base of the
tower fan.
Base of Tower Fan
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
2
30 Inch Tower Fan
Model: COL1066
1
3
2
Lower the front half of
the stand on top of the rear
half of the stand such that
the two latch together.
Ensure that the mains cable
is fed through the hole in
the centre of the stand.
Mains Cord Clamp
Mains Cable
User Manual
5
Advertisement
