Data Format Editor Instructions - Honeywell Voyager 1202g Quick Start Manual

Data Format Editor Instructions

The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User's Guide, available at our
website, www.honeywellaidc.com.
1. Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any bar code type
5. Length: scan 9999 for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan Save to save your entries.
Enter Data Format
Clear All Data Formats
Save