Advertisement
Advertisement
Table of Contents
Summary of Contents for CROWN LINE HT-243
- Page 1 FAN HEATER USER INSTRUCTIONS Model: HT-243 220-240V~ 50Hz 2000W INTRODUTION Thank you for purchasing a series of Fan Heater. Each unit has been manufactured to ensure safety and reliability before first use. Read the instructions carefully and keep them for further...
- Page 2 IMPORTANT SAFEGUARDS When using any electrical appliance basic precautions should be followed. Please read the following instructions as they are for your benefit and safety: 1. Make sure the power supply used corresponds to the rating label. 2. Never obstruct or block any openings of the heater. 3.
- Page 3 NOTE: Should the unit overheat; this heater is fitted with a safety with overheating device which will switch the off automatically. (If the air vent is blocked or if the fan function is not blowing air). If this should happen, all you need to do this: Disconnect the plug from the electrical socket for a few minutes.
- Page 4 SERVICE Hints before returning the appliance: Is your household socket working properly? Are all required switches in the “ON” position? Ensure that the plug is firmly in the socket and switched on. Ensure the heater if standing on an even surface. NOTE: If the power supply cord, or plug is damaged, an official agent must replace it.
Need help?
Do you have a question about the HT-243 and is the answer not in the manual?
Questions and answers