ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this Briteq product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES • High speed Art-Net and sACN Node with 4 highly configurable DMX ports.
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. MAINTENANCE Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit. BRITEQ 2/10 BT-NODE24 Mk2 ®...
Art-Net is an Ethernet protocol based on the TCP/IP protocol suite. Its purpose is to allow transfer of large amounts of DMX512 data over a wide area using standard networking technology. Credits: Art-Net™ Designed by and Copyright Artistic License Holdings Ltd BRITEQ 3/10 BT-NODE24 Mk2 ®...
• Once the line is highlighted: press the ▲-button for 2s: the first digit is inversed A. Press ▼-button to select the parameter you want to change B. Press ▲-button for 2s to confirm: the digit starts flashing and is ready to be adapted. BRITEQ 4/10 BT-NODE24 Mk2 ®...
Page 7
• Press the ▼/▲-buttons shortly to browse the available presets. • Once the desire preset is shown: press ▲-button again for 2s to load it. Example to switch from “DMX to Art-Net universe 1-4” to “Art-Net Clone” → → → BRITEQ 5/10 BT-NODE24 Mk2 ®...
DHCP server. The IP-address is indicated on the Display of the node. The homepage of the BT-NODE24 Mk2 opens. This page has a complete overview of the DMX port settings. Note1: press the small question mark buttons to get more information about a parameter.
Page 9
• LTP: The DMX-signal is sent to the DMX Port from the merging of the selected Art-Net universe in “Universe Number”. The BT-NODE24 Mk2 compares the values on the inputs and sends the last changed value to the DMX Port for each DMX channel.
Page 10
• OFF: the display and all indicators light up. The display goes dark while not used for a while. • Locate: to determine the physical location of the node in the installation, you can activate the Locate function. The node's screen starts flashing so you can see where it is located. BRITEQ 8/10 BT-NODE24 Mk2 ®...
Page 11
MERGING FUNCTION To use the BT-NODE24 Mk2 as a DMX merger we need two different sources. You must configure an output to merge the signal of the two sources. The output merging option can be LTP (Last Takes Precedence) or HTP (Highest Takes Precedence).
I CAN'T REACH THE WEB INTERFACE Check if the link and/or activity leds are on. If so, make sure the IP range of the BT-NODE24 Mk2 is the same as on your computer or console. Try to ping the BT-NODE24 Mk2 with a dedicated application, such as a DOS session on Windows, or a terminal session on MAC.