Universal Innovations Sahara Z12 Assembly And Safety Instructions

Universal Innovations Sahara Z12 Assembly And Safety Instructions

Gas pizza oven

Advertisement

Quick Links

Z
12 Gas Pizza Oven
Assembly and Safety Instructions
Photograph is not to scale. Specifi cations may diff er slightly from the images shown.
Manufactured by
Universal Innovations
B-3P8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sahara Z12 and is the answer not in the manual?

Questions and answers

Summary of Contents for Universal Innovations Sahara Z12

  • Page 1 12 Gas Pizza Oven Assembly and Safety Instructions Photograph is not to scale. Specifi cations may diff er slightly from the images shown. Manufactured by Universal Innovations B-3P8...
  • Page 2 Parts Supplied Description Illustration Pizza Oven Pizza Stone Technical Data CE Approval: 0705/21 Total Heat Input: 4.4kW Injector Size: 1.08mm Gas/Pressure: Butane-28-30mbar/Propane-37mbar Gas Consumption: 314 grams per hour Gas Category: Appliance Type: Destination Countries: GB/IE This appliance shall be installed in conformity with the current regulations and used only in a well-ventilated location. Consult the instructions before installing and using this appliance.
  • Page 3 Warnings • Read the instructions before using the appliance. • Before cleaning, make sure the gas supply and control knob is in the OFF position and that the burner and oven has cooled. • Never operate this appliance unattended. If a fire should occur, keep away from the appliance and immediately call your fire department.
  • Page 4 Assembly Step 1 Pizza Oven Unfold the legs. Assembly Step 2 Pizza Stone Insert the pizza stone.
  • Page 5 Connecting the gas hose Depending on your region, the hose may be pre-assembled. Connecting the gas hose directly to the Pizza Oven. Connecting to a gas tank WARNING • Please always keep the gas bottle in an upright position. • If the appliance is not in use, the gas must be turned off at the supply cylinder. •...
  • Page 6 TO TEST 1. Turn the burner valve OFF. 2. Turn on the gas at the gas cylinder. 3. Apply the soap solution to all gas fittings. Soap bubbles would appear where a leak is present. 4. If a leak is present, immediately turn the gas supply OFF and tighten leaky fittings. 5.
  • Page 7 If you have any queries or require advice or spare parts for this product, please call the Customer Helpline Number 00 353 1 2873797 or for online help - Email: info@saharabbqs.com / Web: www.saharabbqs.com Address: Universal Innovations, Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ireland.

Table of Contents