Powerplus POWAIR0310 Manual

Advertisement

Quick Links

1
APPLICATION .................................................................................................2
2
DESCRIPTION .................................................................................................2
3
PACKAGE CONTENT LIST ............................................................................2
4
SAFETY RULES ..............................................................................................2
5
OPERATED BY COMPRESSED AIR ..............................................................3
6
TOOL USE .......................................................................................................4
7
LUBRICATION ................................................................................................5
8
IMPORTANT!!! ................................................................................................5
9
MAINTENANCE ...............................................................................................6
10
TECHNICAL DATA .........................................................................................6
11
NOISE ..............................................................................................................6
12
TROUBLESHOOTING .....................................................................................7
13
ENVIRONMENT ...............................................................................................8
14
DECLARATION OF CONFORMITY ................................................................8
Copyright © 2015 VARO
POWAIR0310
P a g e
| 1
EN
www.varo.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POWAIR0310 and is the answer not in the manual?

Questions and answers

Summary of Contents for Powerplus POWAIR0310

  • Page 1 POWAIR0310 APPLICATION ....................2 DESCRIPTION ....................2 PACKAGE CONTENT LIST ................2 SAFETY RULES ....................2 ADDITIONAL INSTRUCTIONS FOR FASTENER DRIVING TOOLS OPERATED BY COMPRESSED AIR ..............3 TOOL USE .......................4 LUBRICATION ....................5 IMPORTANT!!! ....................5 MAINTENANCE ....................6 TECHNICAL DATA ..................6 NOISE ......................6 TROUBLESHOOTING ..................7 ENVIRONMENT ....................8 DECLARATION OF CONFORMITY ..............8...
  • Page 2 POWAIR0310 PNEUMATIC 2-IN-1 COMBI NAILER POWAIR0310 APPLICATION Use for almost any finish, furniture, cabinetry, panelling, trim, or craft application. Warning! For your own safety, read this manual and general safety instructions carefully before using the appliance. DESCRIPTION Trigger exhaust vent Nailer nose ¼”...
  • Page 3 POWAIR0310  Repairs can only be effected by official dealers.  To prevent injuries to yourself and bystanders, refer to tool use, maintenance and troubleshooting sections for additional information (fig. 1).  To prevent eye injuries, always wear safety glasses with hard plastic side shields.
  • Page 4 POWAIR0310  when using fastener driving tools operated by compressed air, particular attention must be paid to avoid exceeding the maximum allowable pressure;  fastener driving tools operated by compressed air should only be operated at the lowest pressure required for the work process at hand, in order to prevent unnecessarily high noise levels, increased wear and resulting failures;...
  • Page 5 POWAIR0310 Disconnect air supply in case a nail or stapler is jammed. Pull the grease shaft and pull the upper part of the nailer nose open the magazine in the front. Remove jammed nails or staples and close the front cover.
  • Page 6 POWAIR0310 Fig. 1 Tool Lubricator Quick connector Regulator (0-8.5 bar) Quick coupler Filter Air hose Cut-off valve Quick connector Air compressor Quick coupler MAINTENANCE Disconnect the tool from the compressor before adjusting, clearing jams, servicing & maintenance, relocating and during non operation.
  • Page 7 POWAIR0310 aw (Vibration) 4.6 m/s² K = 0.02 m/s² TROUBLESHOOTING SYMPTOM PROBLEM SOLUTIONS Air leak O-ring in trigger valve is Check and replace O-ring. near top of tool or in damaged. trigger area Trigger valve head are Check and replace.
  • Page 8 POWAIR0310 Magazine is dirty. Clean the magazine. ENVIRONMENT Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way. DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,...

Table of Contents