Electrolux EWF 1486 GBW User Manual page 16

16 www.electrolux.com
• The indicator of the
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
programme phases.
2. If necessary, change the
temperature, the spin speed, the
cycle duration or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message
10.7 Starting a programme
without the delay start
Press
• The indicator of
and stays on.
• The indicator
on the display.
• The programme starts, the door
locks, the display shows the
indicator
If the indicator
flashes, the door is
locking. If the display
shows an alarm
message after the
indicator
flashed for a few
seconds, it indicates
that the door is not
properly locked (for
more details see
Troubleshooting
chapter).
• The drain pump can operate for a
short time when the appliance fills
water.
.
.
stops to flash
starts to flash
.
has
flashes.
10.8 Starting a programme with
the delay start
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
• The door locks, the display shows
• When the countdown is
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
:
countdown.
the indicator .
If the indicator
door is locking. If the display
shows an alarm message after
the indicator has flashed for a
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press to set the
appliance to pause.
• Press until the
display shows
• Press again to
start the programme
immediately.
flashes, the
. To
'.