Table of Contents
Advertisement
Problem
The washing results are
not satisfactory.
You cannot set an op‐
tion.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
13.3 Service
We recommend the use of original spare
parts.
When contacting the Authorised Service
Centre, make sure that these data are
14. TECHNICAL DATA
Dimension
Electrical connection
Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Water supply
Maximum Load
Energy Efficiency Class
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Possible solution
• Increase the detergent quantity or use a different deter‐
gent.
• Use special products to remove the stubborn stains be‐
fore you wash the laundry.
• Make sure that you set the correct temperature.
• Decrease the laundry load.
• Make sure that you press only the wanted touch but‐
ton(s).
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
Maximum
1)
Cotton
Maximum
available. You can find the information
on the rating plate: model, PNC and
Serial Number. (Mod., Prod. No., Ser.
No.)
600 mm/ 850 mm/ 520 mm/ 576
mm
220 - 240 V
2200 W
13 A
50 Hz
IPX4
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
7 kg
A+++
1000 rpm
ENGLISH
23
Advertisement
Table of Contents
