Wireless Lan Connection - Technics OTTAVA f SC-C65 Operating Instructions Manual

Wireless LAN connection

■
Preparation
Disconnect the AC mains lead.
Disconnect the LAN cable.
Place this unit as close to the wireless router as
possible.
Connect the AC mains lead to this unit. (⇒ 26)
Note
• The setting will be cancelled after the set time
limit. In that case, try the setting again.
• To cancel this setting in the middle, press [
turn the unit to standby mode.
• When the connection is established, "
displayed.
Network setting for the first time using
the Google Home app
1 Press [
• "Wi-Fi Setup" is displayed.
2 Press [ ], [ ] to select "Yes" and then
press [OK].
3 Open the Google Home app and follow
the on-screen instructions. (⇒ 31)
Note
• This unit will be displayed as "Technics-
****
SC-C65-
****
(" " stands for characters unique to each set.)
• You can check your network information (SSID,
MAC address and IP address) from the Google
Home app or "Technics Audio Center" app.
• Some items on the Google Home app are
irrelevant to this unit.
• When this unit is switched to standby mode and
turned on before the Wi-Fi setting is complete,
"Wi-Fi Setup" is displayed. Set "Wi-Fi Menu" to
"Off" to turn off the display.
] to turn this unit on.
" if the device name is not set.
30
] or
" is
(Continued)