Philips BDL4221V Manual page 63

Troubleshooting
Poor TV signal
reception
No TV picture
No sound
Video Problems
No Video
Low Quality DVD
playback
Downloaded From TV-Manual.com Manuals
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/SAFETY/saf_troub.htm (4 of 7)2005-11-07 12:55:07 PM
Abnormal picture
seen from the
screen
No picture when
TV input was
selected
No sound output
when a program
with sound was
playing
No signal indicator
is displayed.
Picture not crisp
and some color
distortion
The proximity of mountains or high buildings
may be responsible for ghost pictures,
echoing or shadows. In this case, try manually
adjusting your pictures: see 'fine tuning' or
adjust the direction of the outside aerial.
Have you connected the aerial socket
properly? Have you chosen the right system?
Poorly connected SCART cables or aerial
sockets are often the cause of picture or
sound problems (sometimes the connectors
can become half disconnected if the LCD
Monitor TV set is moved or turned). Check all
connections.
Ensure that the audio cables are firmly
connected to both the audio input connectors
on your the LCD Monitor TV and audio output
connectors on your PC or Video player.
If on certain TV channels you receive a
picture but no sound, this means that you do
not have the correct TV system. Modify the
SYSTEM setting.
Check Video Input Selection
Composite: Yellow colored RCA jack
S-Video: Typically a round 4 pin jack
Component: Typically 3 RCA jacks of
Green, Red and Blue.
Make sure you did not plug the video cable to
video output port behind the LCD monitor TV.
Check DVD connection
Composite gives good picture
S-Video gives better picture
Component gives best picture