Page 2
Welcome! Dear Customer, Thank you for choosing the Beko product. We want your product, manufactured with high quality and technology, to offer you the best efficiency. Therefore, carefully read this manual and any other documentation provided before using the product.
General Warnings About Baking Table of Contents in the Oven........1 Safety Instructions......6.1.1 Pastries and oven food....23 Intended Use........6.1.2 Meat, Fish and Poultry ....25 Child, Vulnerable Person and Pet 6.1.3 Grill ..........26 Safety ..........6.1.4 Test foods........
1 Safety Instructions • This section includes the Intended Use safety instructions necessary • This product is designed to be to prevent the risk of personal used at home. It is not suitable injury or material damage. for commercial use. •...
supervised or trained about the • When the door is open, do not safe use and hazards of the put any heavy objects on it or product. allow children to sit on it. You • Children should not play with may cause the oven to tip over the product.
• The product must not be • If the power cable is damaged, plugged into the outlet during it must be replaced by the installation, repair, and trans- manufacturer, an authorized portation. service or a person to be spe- • Plug the product into an outlet cified by the importer company that meets the voltage and fre- in order to prevent possible...
• The product is heavy, carry the Safety of Use product with at least two • Ensure that the product is people. switched off after every use. • Do not use the door and / or • If you will not use the product handle to transport or move for a long time, unplug it or the product.
Temperature Warn- detailed information, refer to the section "Usage of ac- ings cessories". • WARNING: The accessible • Accessories can damage the parts of the product will be hot door glass when closing the during use. Care should be product door. Always push the taken to avoid touching the accessories to the end of the product and heating elements.
preheated oven. Remove any • Never wash the product by excessive pieces of spraying or pouring water on it! greaseproof paper hanging There is the risk of electric from the accessory or con- shock! tainer to avoid the risk of •...
• During self-cleaning, smoke cooking utensils from the will be released due to the oven. If your product has a burning of food residues. Vent- pyro proof accessory (resist- ilate your kitchen well during ant to high temperature self- the cleaning process. cleaning), you do not need to •...
rack. In addition, if you cook your meals one after the other, it will save energy be- cause the oven will not lose its heat. 3 Your product 3.1 Product Introduction 1 Control panel 2 Lamp 3 Wire shelves 4 Fan motor (behind the steel plate) 5 Door 6 Handle 7 Lower heater (under the steel plate)
3.2.1 Control Panel 1 Function selection knob 2 Timer 3 Temperature selection knob If there are knob(s) controlling your Timer product, in some models this/these knob(s) may be so that they come out when pushed (buried knobs). For settings to be made with these knobs, first push the relevant knob in and pull out the knob.
order of the operating modes shown here may differ from the arrangement on your product. Function Temperature Function description Description and use symbol range (°C) Oven lamp No heater works in the oven. Only the oven lamp lights up. The oven is not heated. Only the fan (on the back wall) oper- ates.
3.5 Use of Product Accessories Cooking shelves There are 5 levels of shelf position in the cooking area. You can also see the order of the shelves in the numbers on the front frame of the oven. On models with wire shelves : Wire grill It is used for frying or placing the food to be baked, fried and stewed on the desired...
Page 15
On models without wire shelves : It is also crucial to place the trays on the side shelves properly. The tray has one dir- ection when placing it on the shelf. While placing the tray on the desired shelf, its side designed for holding must be on the front.
Page 16
Tray stopping function - On models with wire shelves There is also a stopping function to prevent the tray from tipping out of the wire shelf. While removing the tray, release it from the rear stopping socket and pull it towards yourself until it reaches the front side.
3.6 Technical Specifications General specifications Product external dimensions (height/width/depth) (mm) 595 /594 /567 Oven installation dimensions (height / width / depth) 590 - 600 /560 /min. 550 (mm) Voltage/Frequency 220-240 V ~; 50 Hz Cable type and section used/suitable for use in the min.
4 First Use Before you start using your product, it is re- If the first timer is not set, “12:00” commended to do the following stated in symbol continue to flash the following sections respectively. and your oven will not start. For your oven to function, you must 4.1 First Timer Setting confirm the time of day by setting...
NOTICE: During the first use, smoke and odour may come up for several hours. This is normal and you just need good ventila- tion to remove it. Avoid directly inhaling the smoke and odours that form. 5 Using the Oven 5.1 General Information on Using the 5.2 Operation of the Oven Control Oven...
Page 20
audible warning. The 3-line animation : Key lock symbol appearing on the display stops and the : Temperature symbol C symbol appears fixed next to the : Settings symbol temperature value. The oven does not : Door lock symbol * switch off automatically since manual * It varies depending on the product model.
ð Your oven will start operating im- mediately at the selected function and temperature. The set baking time starts counting down and appears on the display. The baking time counting down and the set ð The symbol is shown on the display temperature value and the 3-line and the 3-2-1 count down starts.
Page 22
2. Set the alarm time with the keys. 2. Set the desired level with the keys. (b-01-b-02-b-03) ð After setting the alarm time, the symbol remains lit and the alarm ð Touch the key for confirmation or time starts to countdown on the wait without touching any key.
2. Set the time of day by touching the 4. Touch the keys to set the minute. keys. 5. Confirm the setting by touching the 3. Touch key to activate the key. minutes field. ð The time of day is set and the symbol disappears on the display.
Page 24
• If you will cook by using cookware on the • If the cake is moist, use a small amount wire grill, place it in the middle of the wire of liquid or reduce the temperature by grill, not near the back wall. 10°C.
Food Accessory to be Operating func- Shelf position Temperature (°C) Baking time used tion (min) (approx.) Round cake mould, 26 cm in Top and bottom Sponge cake diameter with 30 … 40 heating clamp on wire grill Round cake mould, 26 cm in Fan assisted bot- Sponge cake diameter with...
Cooking table for meat, fish and poultry Food Accessory to be Operating func- Shelf position Temperature (°C) Baking time used tion (min) (approx.) 15 mins. 250/ Steak (whole) / Fan assisted bot- Standard tray * max, after 180 … 60 … 80 Roast (1 kg) tom/top heating Lamb's shank...
Food Accessory to be Operating func- Shelf position Temperature (°C) Baking time used tion (min) (approx.) Round cake mould, 26 cm in Top and bottom Sponge cake diameter with 30 … 40 heating clamp on wire grill Round cake mould, 26 cm in Fan assisted bot- Sponge cake diameter with...
Page 29
• Be sure to completely wipe off any re- • Catalytic surfaces absorb oil thanks to its maining liquid after cleaning and immedi- porous structure and start to shine when ately clean any food splashing around the surface is saturated with oil, in this during cooking.
7.2 Cleaning Accessories Do not put the product accessories in a dishwasher unless otherwise stated in the user’s manual. 7.3 Cleaning the Control Panel • When cleaning the panels with knob-con- trol, wipe the panel and knobs with a damp soft cloth and dry with a dry cloth. Do not remove the knobs and gaskets un- derneath to clean the panel.
Page 31
are not resistant to high temperatures. It 7. When the cleaning process is finished, must be removed from the oven before "End" appears on the display. cleaning to avoid damage. 8. After "End" appears on the display, turn • Do not clean the door seal. The glass the function and temperature knobs to 0 fiber seal is very delicate and easily dam- (off) position to end the process.
ð The “ECO” message is shown on clean them using a dishwashing detergent, warm water and a soft cloth or sponge and the display for approx. 2 seconds dry them with a dry cloth. For lime residue and then the P1:30 message starts that may form on the oven glass, wipe the to flash.
7. Get the oven door to a half-open posi- tion. 8. Pull the removed door upwards to re- 3. As shown in the figure, gently lift the in- lease it from the right and left hinges nermost glass (1) towards “A” and then, and remove it.
crucial to place the lower corners of the innermost glass (1) to meet the lower plastic slots. 7. Push the plastic component towards the frame until a "click” sound is heard. 7.8 Cleaning the Oven Lamp In the event that the glass door of the oven lamp in the cooking area becomes dirty;...
4. If your oven lamp is type (A) shown in the figure below, rotate the oven lamp as shown in the figure and replace it with a new one. If it is type (B) model, pull it out as shown in the figure and re- place it with a new one.
Page 36
Error codes/reasons and possible solutions Error codes Error reasons Possible solutions Contact the authorized service to be able to cook again with the meat probe. Remove the meat probe and set Meat probe communication er- Er 5 the function selection knob to off (0) to be able to cook normally without the meat probe in the oven.
Need help?
Do you have a question about the CIMY92XP and is the answer not in the manual?
Questions and answers