Advertisement
Step 4. Using the enclosed magnetic
screwdriver, remove the
screw indicated in the picture.
(HDD Removal)
Step 6. Gently pull out the original
HDD away from the computer as
shown.
Step 9. Reinstall the HDD access
door removed and properly tighten
the two screws.
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 994655000
Rev. A
VGN-CR Series Hard Disk Drive
Replacement Instructions
CAUTION:
individual
plastic tab before releasing the
hard drive from the connector!
(HDD Reinstallation) Steps 7-10
Step 7. Hold the new HDD by the
edges and slide the tab inside the
opening at an angle.
(Battery tabs should be properly locked)
Step 10. Reinstall the Battery
Pack. Reconnect the AC Adapter.
Step 5. With even force slide out the
Do not pull the
HDD as shown. Some force may be
required to unlock the HDD from the
connector.
Step 8. Align the HDD with the
connector and with even force push
in the new HDD. Reinstall the
previously removed screw.
Step 11. Power on your computer
and
process
described on the back of the recovery
disk's case.
Return the old HDD Bay to Sony
following
instructions.
2/2
Fully disconnect
before removal
of HDD
continue
with
the
by
following
instructions
the
included
recovery
shipping
Advertisement
