Connection Setup - Philips 42PFL74335/60 Manual

7.5

Connection setup

The TV needs to know what connections you have
made and which device is connected to which
connector.
If you have used the Connection assistant the
connection setup is already done.
7.5.1 Naming your devices
Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD, VCR, Game, ...) to
the connector you use for that device.
‡ Press Menu.
® Select Setup > Installation> Rename devices.
Ò Press π to enter the list.
† Press o or œ to select the connector you
used for the device you connected.
º Press π.
◊Press o or œ to select the type of device.
‹ Press Menu to quit the menu.
7.5.2 Audio setup
If you use the Audio In L/R (DVI to HDMI)
connector for a device connected to HDMI at the
back of the TV, assign this Audio In to the HMDI 1,
2 or 3 where the device is connected.
‡ Press Menu.
® Select Setup > Installation > Audio setup.
Ò Press π twice.
† Press o or œ to select the HDMI connection
to link with this Audio In.
Audio setup Audio in L/R
Audio in L/R None
HDMI 1
HDMI 2
HDMI 3
Downloaded From TV-Manual.com Manuals
38
7.5.3 Decoder channels
Decoders that decode an antenna channel are
connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to
be decoded. Then assign the connection where the
decoder is connected
‡ Press Menu.
® Select Setup > Installation > Decoder >
Channel.
Ò Press π to enter the list.
† Press o or œ to select the channel to decode.
º Press p and go back to select Status.
◊Press o or œ to select the connector used by
the decoder.
‹ Press Menu to quit the menu.
Installation Decoder
... Channel
Preferences Status
Connections assist.
Rename devices
Audio setup
Decoder
Clock
Factory settings
Connections