First Use - Medion MD 99499 Instruction Manual

5. First Use

To operate your Notebook safety and ensure a long service life, you should read the
"Operational safety" chapter at the beginning of this manual. All operating software
is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
 Connect the supplied mains adapter to the Notebook. Next, connect the power
cable to the adapter and then plug it into a mains socket.
 Open up the display to the desired position using your thumb and forefinger.
The display should not be folded back by more than 120°. Always hold the
display firmly by the middle when folding it back, adjusting the position and
closing it. Failure to do so may damage the display. Never use force to open the
display.
PLEASE NOTE!
When first operating your Notebook please ensure that the mains
adapter is connected. This is required for Windows® 8 to correctly work
out the Windows® 8 performance index.
 Switch the Notebook on by pressing the on/off switch. The Notebook will now
start and run through various steps.
PLEASE NOTE!
There should be no bootable disk (e.g. the recovery disc) in the optical
drive as this will prevent the operating system from being loaded from
the hard drive.
The operating system will be loaded from the hard drive. The loading process takes
a little longer during the initial setup. Once all the necessary data has been entered,
the operating system will be set up. The operating system is fully loaded once the
®
Windows 8 start-up screen appears.
PLEASE NOTE!
The initial installation may take a few minutes. Do not unplug the
Notebook from the mains or switch it off during the initial installation.
This may adversely affect the installation. Do not switch off the
Notebook until after the installation has been completed successfully
and the startup screen appears.
AFTER SALES SUPPORT
MODEL: MD 99499 • PRODUCT CODE: 92305 • 01/2015
1300 884 987
www.medion.com.au
23