Switching The Video Signal Type (Tv Format); Selecting The Hdmi 4K Signal Format (4K Mode) - Yamaha YHT-3072 Owner's Manual

Switching the video signal type (TV FORMAT)

LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
"TV FORMAT"
Settings
NTSC, PAL
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR

Selecting the HDMI 4K signal format (4K MODE)

LINK MASTER
OUT 2 Hi -R es ENHANCER
ECO
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
"4K MODE"
Settings
Inputs/outputs 4K signals shown in the following table. Depending on the
MODE 1 connected device or HDMI cables, video may not be displayed correctly.
In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K signals shown in the following table.
Note
When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz YCbCr 4:4:4
YCbCr 4:2:2
87
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
MODE 1
8 bit 10 bit 12 bit 8 bit
–
4
–
4
4
4 4
4 4
4 4
4
MODE 2
10 bit 12 bit
–
–
–
–
–
–
4