Toro TimeCutter 74864 Setup Instructions page 4

5
Completing the Setup
Parts needed for this procedure:
1 Ignition key
1 Hose coupling (non-CE machines only)
1 Operator's Manual
1 Engine owner's manual (non-Toro engines only)
1 Operator training material
Checking the Tire Pressure
Check the front and rear tires for proper inflation; refer to
Checking the Tire Pressure in the Operator's Manual for the
recommended inflation pressure.
Checking the Side-Discharge Chute
Remove the packing restraint holding the side-discharge chute
up and lower the chute into place.
Checking the Engine-Oil Level
Before you start the engine and use the machine, check the
oil level in the engine crankcase; refer to Checking the Oil
Level in the Operator's Manual.
Checking the Air Cleaner
Ensure that the air cleaner is properly installed in the engine
air-cleaner box.
Organizing the Material
Keep all the following items with the machine:
•
Ignition key
•
Hose coupling (non-CE machines only)
•
Operator's Manual
•
Engine owners's manual (non-Toro engines only)
•
View the operator training material before operating the
machine.
4