Table of Contents
Advertisement
USING WEIGHTED WARMTH™
Attach the Pad Connector to the Control Connector. Push both
parts together securely to ensure a tight fit.
Control
Connector
Pad
Connector
NOTE: The Control Connector must be connected to the Pad
Connector before plugging the unit into an electrical outlet.
1.
After connecting the Pad Connector to the Control
Connector, plug the unit into an electrical outlet.
2.
To turn the unit on, press the power button. Select the
desired heat setting (warm, low, medium, or high) by
continuing to press the power button until the heat indicator
light turns on your desired setting.
NOTE: The "High" indicator light will blink red when an error
occurs. If this happens, unplug Weighted Warmth™ from
the electrical outlet then check the physical condition of the
cord, the wall outlet, and the connection between the Control
Connector and the Pad Connector. If blinking persists even
after you have confirmed a proper connection, contact Pure
Enrichment at:
help@pureenrichment.com
3.
To turn the unit off, scroll through the remaining heat
settings sequentially until the heat indicator lights turn off.
NOTE: If the heat level indicators do not light up or stay on,
make sure the Control Connector is securely plugged into
the Pad Connector.
6
4
AUTO-OFF FEATURE
To conserve energy and prevent skin burns caused by excessive
use, Weighted Warmth™ includes an auto-off feature. The unit
will turn off automatically after two hours of continuous use. The
red auto-off light will blink when this feature is activated.
NOTE: After a power outage, Weighted Warmth™
automatically resets the timer on the auto-off feature.
WASHING INSTRUCTIONS
DO NOT DRY CLEAN! DO NOT USE BLEACH! DO NOT USE
WRINGER!
1.
Disconnect Weighted Warmth™ from the electrical outlet.
2.
Detach the Pad Connector from the Control Connector
3.
Machine wash Weighted Warmth™ in cold water on the
gentle cycle, or hand wash. Tumble dry on low heat or line
dry.
4.
Do not plug in Weighted Warmth™ until the Pad Connector
is completely dry.
PRODUCT SPECIFICATIONS
Size:
One Size Fits Most
Weight:
5.5 lbs
Power Supply: AC: 120V, 60Hz, 100W
Pad Material:
Micromink (both sides)
Auto Shut-Off
120 minutes
Timer for Heat:
4 Heat
Warm–green light, temperature range (~110 F)
Settings:
Low–yellow light, temperature range (~120 F)
Medium–orange light, temperature range (~130 F)
High–red light, temperature range (~140 F)
7
5
Advertisement
Table of Contents
Need help?
Do you have a question about the weighted warmth PEHPNKWT-J and is the answer not in the manual?