Verizon CR200A User Manual page 23

CONNeCTING A WI-FI DeVICe UsING A PAssWORD
1. Verify each device that you are connecting with Wi-Fi has built-in Wi-Fi
or an external Wi-Fi adapter.
2. Open the device's Wi-Fi settings application.
3. Select the Wi-Fi network name (SSID) of the Gateway from the device's
list of discovered Wi-Fi networks.
4. When prompted, enter the Gateway's Wi-Fi password (WPA2 or WPA3
key) into the device's Wi-Fi settings. The Gateway's default Wi-Fi
network name and password are located on the sticker on the bottom of
the Gateway.
5. Verify the changes were implemented by using the device's web browser
to access a site on the internet.
6. Repeat these steps for every device that you are connecting with Wi-Fi
to the Gateway.
02 / CONFIGURING THE VERIZON
INTERNET GATEWAY
23