Page 2
Card Enrollment Station·User Manual Regulatory Information FCC Information compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 3
Card Enrollment Station·User Manual 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
Page 4
Card Enrollment Station·User Manual Warnings All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company.
Page 5
Card Enrollment Station·User Manual Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Card Enrollment Station·User Manual 1 Overview 1.1 Introduction Figure 1-1 D8E Series Card Enrollment Station The picture is only for reference. Please refer to the actual products. D8E is a non-touch IC card enrollment station, used as a necessary non-touch card test machine by card issuers, chip suppliers, and testing organizations.
Card Enrollment Station·User Manual 1.2 Main Features Plug-and-play USB with no-driver technology 2 SAM cassettes (standard configuration) Supports on-line upgrade Supports various card types (Mifare card, CPU, PSAM, and EM card) Well-defined API Adopts high-level encryption algorithm to ensure the security for data communication ...
Card Enrollment Station·User Manual 2 Connection Description 2.1 USB Interface Connection Plug the wiring of USB into the USB interface of PC directly. Figure 2-1 USB Interface Connection The picture is only for reference. Please refer to the actual products. 2.2 Communication When the card enrollment station is identified by the PC, its indicator will turn blue, and item “HID-compliant device”...
Need help?
Do you have a question about the SK1I01M and is the answer not in the manual?
Questions and answers