Page 1
SKYPAD™ (OH-SKYPAD-PRO) Contact-free – Virtual Care System With Emergency Alert Quick Guide (Version 2.2) Contact Information OnSky Health International Address: 5655 Silver Creek Valley Road, #798 San Jose, CA 95138, USA. Email: supports@onskyhealth.com info@onskyhealth.com sales@onskyhealth.com Website: www.onskyhealth.com Phone: +1 408 913-0004 Disclaimer NOT A MEDICAL DEVICE.
Page 2
The SkyPad consists of the following devices: The Health Display The Pad 1. OnSky Health App • For Android devices, please download “OnSky Health” app on Play Store. • For iOS devices, please download “OnSky Health” app on Apple Store.
Page 3
Put a pillow on top of the bed sheet and the Pad. o Note about Orientation: Place the Pad so that the OnSky logo is outside the pillow (leave about 5cm of the Pad outside pillow) as shown in the below image.
Email: your email address. c. Password: make sure to write it down somewhere to remember in the future. • Read the Terms and Conditions, then check on “I accept the agreement” to agree. • Click on “Register SkyPad”, this completes the account registration.
Page 5
• To log in, you need to get to the Log-In page above. You can also get out of the app and then re-open the “onsky health” App. • Enter the email address and password. (Note: the email address that you entered for registering account in section above.
Page 6
6. Add SkyPad to Account (Note: Skip this step if there is user ID and password in the back of the Health Display) • Once the user logs in the account, on the Device page, click “+” => Enter the last 5 digits which is labeled in the back of the Health Display =>...
• When WIFI is successfully connected to the Health Display, a message will pop up and you will see a blue light at the bottom of the Health Display. If you see red light, then you can wait at least 3 minutes and repeat the steps above. Blue light 8.
Page 8
Save button Emergency Information (for first responders) • Go to Settings on the App, click on Emergency. • Fill out all the names and telephone numbers. You can enter up to 3 people as first responders. For each person, click the “Save” icon as shown below. •...
Page 9
Go to Settings on your app. Click on “Config Sync Display”, then click on “Sync”. 12. Add more SkyPad • If you have more than one SkyPad set (for multiple family members), you can put them into one account for easy access. •...
Page 10
Note: It takes about 1 – 2 minutes for SkyPad to learn your vital signs. When you lie down on bed, stay still about 1 - 2 minutes until heart rate and respiration rate are showing. After that you can sleep in any position and it continues to work.