Page 1
SAFETY INSTRUCTIONS Li-ION DT2 Battery 7S3P/ 25.2V / 9.0Ah / 226.8Wh 7S2P/ 25.2V / 5.0Ah / 126 Wh IDEX Fire & Safety page 3 - 6 Seite 7 - 11 Please scan for more languages ! www.akku-power.com...
Page 2
Congratulations! WARNING! Please read the operating instructions of your AKKU POWER / IDEX Fire & Safety charger. You have purchased an electro hydraulic rescue tool. These tools have distinct advantages over traditional rescue tool equipment. WARNING! Fire and burn hazard! Battery liquid may be flammable if exposed to spark or flame.
Page 3
or lack of experience and knowledge if they have been given • DO NOT short-circuit the battery pack. Make sure connections supervision or instruction concerning use of the appliance in a do not contact metal objects, water, oil, jewelry, etc. safe way and understand the hazards involved.
Always adhere to these regulations and to the locally prevailing battery vent/ fire/ explosion may follow, depending on the circumstances. If a battery burns, the vapors can irritate eyes, skin and the respiratory tract. safety regulations, and proceed very carefully. If chemicals leak, follow the instructions below: Inform all people involved in the activities of the operation about Inhalation:...
Page 5
Charge Cycles All possible LED combinations are listed in table 2 to table 7 The number of charging cycles is displayed when the button is pressed and Description combination combination number held for at least 5 seconds.To do this, first deactivate the SoC display and the white LED on the back.
Page 6
LED CODE Summary Description Description Action combination comb. Error Load Overcurrent 1 Current consumption Wait until the error code is gone (min. 30s). Check the battery The error codes are (>52A for 5s) between battery and tool function using another tool. displayed during use and is temporarely too high If the error persists with second tool contact your dealer...
Kurzschluss erzeugen, obwohl der Akku einen IP 68 Standard erfüllt. Einer dieser Vorteile ist die leistungsstarke Energiequelle - eine Lithium- Lesen Sie die Bedienungsanleitung Ihres Akku Power / Ionen-Batterie. Die Lithium-Ionen-Batterietechnologie wird weltweit in den unterschiedlichsten Anwendungen eingesetzt. Lithium-Ionen-Batterien zeichnen IDEX Fire &...
Page 8
3. Externer Kurzschluss • Die Lüftungsöffnungen müssen stets sauber und frei sein. • Wenn Sie Ihren Akku lagern, muss, egal ob er an ein Gerät angeschlossen • Das Gerät und der Akku dürfen nicht an Orten oder in Fahrzeugen gelagert ist oder nicht, sichergestellt sein, dass er nicht versehentlich in Kontakt mit oder verwendet werden, an/in denen die Temperatur 55°C (131°F) erreichen Metallspänen oder Pulver kommt.
Page 9
• Inhalation: Der Inhalt von geöffneten Akkus kann Atemwegsirritationen elektronischer Form und in Papierform zur Verfügung gestellt und verursachen. Sorgen Sie für Frischluftzufuhr und rufen Sie einen Arzt. bei der Akku Power GmbH Batterien bestellt werden: • Hautkontakt: Der Inhalt von geöffneten Akkus kann Hautirritationen info@akku-power.com verursachen.
Page 10
Akku-LED-Anzeige LED- LED-Kombination Beschreibung GRÜNE, ORANGENE, und ROTE LED blinkt Komb. Nr. Unterspannung (schnelles Blinken) GRÜNE, ORANGENE, und ROTE LED leuchtet Tabelle 3: Ladezustandsanzeige (SOC) separat vom Gerät und Lader Keine der LEDs leuchtet oder blinkt Ladezyklen: Tabelle 1: LED Farben und Modi Die Anzahl der Ladezyklen wird angezeigt, wenn die Taste mindestens 5 Der Akku verfügt über grüne, orangene und rote LEDs.
Page 11
LED CODE Zusammenfassung Name Beschreibung Vorgehensweise Kombination Komb.Nr. Fehler Überstrom Der Stromverbrauch Warten Sie, bis der Fehlercode verschwunden ist (min. 30s). Die Fehlercodes werden bei Last 1 zwischen Akku und Überprüfen Sie die Akkufunktion mit einem anderen Werkzeug. Verwendung und Ladevor- (>52A for 5s) Werkzeug ist Wenn der Fehler mit dem zweiten Werkzeug weiterhin besteht,...
Need help?
Do you have a question about the 7S3P and is the answer not in the manual?
Questions and answers