Table of Contents
Advertisement
GA-686DX
It is assumed that the chassis is designed for a standard IBM XT/AT
mainboard mounting. Place the chassis on the anti-static mat and remove the
cover.
Take the plastic clips, Nylon stand-off and screws for mounting the system
board, and keep them separate.
3.2. MAINBOARD LAYOUT
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS
t
CN1-8 I/O Ports Connector
CN1
For Serial port1(COM A).
CN2
For LPT port.
CN3
For Serial port2 (COM B).
×
Figure 3.1Ø
3-2
Advertisement
Table of Contents
