Steps
1. Align and insert the front-cover tabs into the slots on right side of the chassis.
2. Rotate the front cover towards the chassis and snap the tabs into place.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Optical drive
Removing the optical drive
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
cover.
About this task
NOTE:
Depending on the configuration ordered, your computer may not have an optical drive installed.
The following image(s) indicate the location of the optical drive and provides a visual representation of the removal procedure.
18
Removing and installing components
After working inside your
Before working inside your
cover.
computer.
computer.